AVS Ventvisor Installation Instructions Manual

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Service at 800-241-7219
Important Safety Information
• CAUTION - Before driving, ensure that the vent visors are properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
• When using Surface Prep, avoid contact with skin. Use in well ventilated area. If contact is made with
material, flush area with large amounts of water. If irritation persists, get immediate medical
attention. USE PREP ON RUBBER ONLY

Contents

NOTE: Actual product may vary from illustration.
Front Driver
Visor
Tools Required

Preparation Before Painting / Installation

• Please review your warranty card BEFORE installation of this product.
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Buff the outside rubber window channels where the visor will mount with a scotch brite pad, then clean
Be sure to prep all windows before installing the first visor to prevent surface prep pad from drying out.
mirror cap
1
Installation Instructions
Ventvisor
Front Passenger
Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
prep rubber channel
NOTE: See surface prep warning on page 1
Deflector
®
Alcohol Pad x2
Clean Towel
with an alcohol pad.
Page 1 of 2
I - Sheet Number VV23 Rev.A
Surface Prep
Scotch Brite pad
Pad