Autel TS401 Update Instructions

Update Instructions
1. Download & Install MaxiLinkII Software
The TS401 is updated via the MaxiLinkII software (installed on a Windows PC)
and by downloading the Update file from the Maxitpms.com website.
The Maxilink II software is available at
product/580.jhtml. From the homepage, www.maxitpms.com, go to Products, then
select MaxiTPMS TS401, click on the Downloads tab and then click on Maxi PC
Suite TS401 file to download the MaxiLinkII software. To unzip the file, right-
mouse click on the file and select Extract All. Double-click on Setup.exe to install.
2. Download TS401 Update
To download software updates, click here,
product/580.jhtml, then select TS401 Update file. Or from the homepage,
maxitpms.com, click on Products, then MaxiTPMS TS401, and click the Downloads
tab. In the list, click the TS401 Update file to download the zip file. To unzip the
file, right-mouse click on the file and select Extract All. Remember to note the
location of extracted folder.
3. Connect Tool to PC
Connect tool to the computer using the supplied USB and select Update Mode on the tool.
Note: When an error occurs and the tool is unable to work properly, you may need to update the
programs. Power off the tool first and then hold the N button, connect the tool with the computer
via USB and then the tool will enter the Update Mode forcedly. Follow the update procedures to
refresh the program.
4. Update the Tool
IMPORTANT: Both the TS401 file and the DTC file must be updated for the tool to
function correctly. There is NO need to register the tool before updating.
Launch MaxiLinkII on the PC and then select TS401 on the left-hand side of
the screen under the TPMS tab. Under Update Program, click on Select File and
browse to the software update you downloaded. Open the folder labelled US,
select the file within (the file extension is .bin) and click on Update.
The application will communicate with the tool and update. The PC application
and the tool will display a message once the update is completed.
Next, under Update DTC, click on Select File, browse to file (the file extension
is .aut) and click on Open, and then click on Update.
The application will communicate with the tool and update its software. The PC
application and the tool will display a message once the update is completed.
Now your tool is ready to use!
( 855 ) 288-3587 (US)
supporttpms@auteltech.com
(China HQ)
http://www.maxitpms.com/tpmscms/
http://www.maxitpms.com/tpmscms/
maxitpms.com
Follow Us @AutelTools
Register and update tools for latest coverage
© 2017 Autel Intelligent Technology Inc.
www.
TS401
1.
2.
3.
4.