Autel TS508 Easy Instructions

TPMS DIAGNOSE
EASY INSTRUCTIONS
• Select TPMS Diagnose from the main menu
• Follow the on-screen TPMS Diagnose Guide
Trigger all sensors and connect TS508 via OBDII cable
• In case of a duplicate sensor ID, a
• If the sensor does not trigger an
Trouble codes present in
the TPMS Control Module.
Battery in the sensor is low.
Adjust pressures displayed in
35.7
red to match Placard Sticker.
56.7
There is no sensor ID present in the
TPMS Module. The sensor will not
activate and requires replacement.
TS508 STATUS SCREEN
D will appear
X will appear
Audi A8 11/2009-12/2016
No Trouble codes present in
the TPMS Control Module.
The sensor ID matched the ID
stored in the TPMS Module.
The sensor ID does not match the
ID stored in the TPMS Module.
Sensor will not activate and must
be replaced. Original ID is stored
in the TPMS Module.