Access The Ip Camera Via 3Gpp Mobile Phone - COMPRO VideoMate IP50 Installation Manual

Access the IP Camera via 3GPP Mobile Phone:

You can access the desired IP camera via compatible 3GPP mobile
phone when both the IP camera has a working internet connection
and the mobile phone has a good connection on the GPRS or 3G
network.
There are several criteria which need to be fulfilled before the 3GPP
function can be successfully utilized.
1. In order to use the 3GPP function, you should turn on the 2
stream of the IP camera and set the resolution as QQVGA, FPS as
5, and quality as medium. In addition, by enabling the 2
you will notice a drop in the frame rate in the primary stream. This
is a normal behavior since the hardware has to process two
streams instead of just one.
2. Please apply for a Dynamic DNS (DDNS) address as specified on
the previous page.
3. Please ensure that you've got an active internet connection on both
the IP50(W) and the intended mobile phone.
4. To view the live image, please enter the following address into the
phone's web browser or streaming software,
"rtsp://ip50-ip/medias2". The ip50-ip is the DDNS address that
you've obtained in step 2.
Compatible Phones:
HTC: Touch Diamond
Nokia: N78
Samsung: U708
Sony Ericssion: K610i / W850i
Incompatible Phones:
Nokia: 6500C
Sony Ericssion: T700 / W910 / Z750i
Dopod: CHT9110
nd
nd
stream,
21