Advertisement
Quick Links
Product Installation Guidelines
®
CliniLever
Tap Type 54 Fixed 150 C/D
PRODUCT CODES:
- TC54FC1C
SPECIFICATIONS
−
The CliniLever
hospitals, aged care facilities, schools and in-home care.
−
®
CliniLever
−
The single lever for on/off, hot/cold temperature have a straight forward operation which simplifies
hand washing.
−
All CliniLever
−
Our highly sought after lever handle design can easily be operated with wrist or elbows.
−
The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass fixed outlet.
Quick action SBA's includes brass ceramic cartridge component, with red and blue indicator button
−
on 150mm lever action handles.
IMPORTANT: All CliniLever
premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice.
TOOLS REQUIRED
−
Power drill, spanner and hex key
−
Thread tape
© Galvin Engineering Pty Ltd
CP-BS Hospital Wall Bib
®
product range is primarily used for hand washing applications in medical facilities,
products provide state of the art features to comply with the latest healthcare guidelines.
®
products provide laminar flow (not aerated).
®
healthcare taps are tested in accordance with AS/NZS 3718 and leave our
Version 4, 27 August 2021, Page 1 of 4
½" BSP – Female
Laminar Flow
Ceramic
Min
50
Max
500
Min
5
Max
65
5.25
Chrome
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Galvin Engineering CliniLever TC54FC1C
Summary of Contents for Galvin Engineering CliniLever TC54FC1C
- Page 1 Working Pressure Range (kPa) Working Temperature Range (°C) Nominal Flow Rate (LPM) 5.25 Finish Chrome NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Power drill, spanner and hex key − Thread tape...
- Page 2 INSTALLATION IMPORTANT: Galvin Engineering products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards. Failing to comply with these provisions shall void the product warranty and may affect the performance of the product.
- Page 3 Handle is loose. Screw has come loose. Tighten handle screw. Flange does not screw down Re-position tap bodies and breach Tap bodies are set too far out. onto basin/sink surface. piece. © Galvin Engineering Pty Ltd...
- Page 4 8. Follow the product installation guidelines for the relevant product to re-assemble. WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.
Need help?
Do you have a question about the CliniLever TC54FC1C and is the answer not in the manual?
Questions and answers