Advertisement
Quick Links
Product Installation Guidelines
®
CliniLever
Set Type 50 Fixed 150 C/D
PRODUCT CODES:
- TC50FC1C
SPECIFICATIONS
−
The CliniLever
hospitals, aged care facilities, schools and in-home care.
−
®
CliniLever
products provide state of the art features to comply with the latest healthcare guidelines.
−
The dual levers are easy to access and operate which simplifies hand washing.
−
All CliniLever
−
Our highly sought after lever handle design can be operated with elbows or wrists to avoid hand
contact.
−
The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass gooseneck
outlet.
−
Quick action SBA's include brass ceramic cartridge components, with red and blue indicator buttons
150mm lever action handles.
IMPORTANT: All CliniLever
our premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change
without notice.
TOOLS REQUIRED
− Power drill, spanner
− Thread tape
© Galvin Engineering Pty Ltd
CP-BS Hospital Hob Mixing
®
product range is primarily used for hand washing applications in medical facilities,
®
products are laminar flow (not aerated).
®
healthcare taps are tested in accordance with AS/NZS 3718 and leave
Version 4, 26 August 2021, Page 1 of 4
½" BSP – Male
Laminar Flow
Ceramic Disc
Min
50
Max
500
Min
5
Max
65
5.3
Chrome
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Galvin Engineering CliniLever TC50FC1C
Summary of Contents for Galvin Engineering CliniLever TC50FC1C
- Page 1 Working Pressure Range (kPa) Working Temperature Range (°C) Nominal Flow Rate (LPM) Finish Chrome NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Power drill, spanner − Thread tape © Galvin Engineering Pty Ltd...
- Page 2 1/2" BSP MI INSTALLATION IMPORTANT: Galvin Engineering products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
- Page 3 Install an inline strainer. Handle is loose Screw has come loose Tighten handle screw Flange does not screw Re-position tap bodies and down onto basin/sink Tap bodies are set too far out breach piece surface © Galvin Engineering Pty Ltd...
- Page 4 8. Follow the product installation guidelines for the relevant product to re-assemble. WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.
Need help?
Do you have a question about the CliniLever TC50FC1C and is the answer not in the manual?
Questions and answers