Advertisement
Quick Links
WARNING
This product is designed to enhance the appearance of the
vehicle. Do not rely in any way on the components of this
product to contain occupants or cargo within the vehicle, or
to protect against injury or death in the event of an accident.
Never operate vehicle in excess of manufacturer's specifi-
cations.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so could
place occupants or cargo of the vehicle in a potentially
dangerous situation. After installing or reinstalling, check to
make sure it has been properly installed.
51238 pg 1
TJ Header Windshield Channel
Installation Instructions
For: Wrangler TJ
DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE
OTHER THAN THOSE LISTED ABOVE.
Parts List and Hardware Identification
Windshield Header, Qty - 1,
Part Number 378.36
5/16 x 1-1/4" Bolt, Qty - 2,
Part Number 378.59
Part Number: 51238
J-Hook Brackets, Qty - 2,
Part Number 378.61
5/16" Washer, Qty - 2,
Part Number 233.04
0203 Rev. A
Advertisement
Related Manuals for Bestop 51238
Summary of Contents for Bestop 51238
- Page 1 TJ Header Windshield Channel Installation Instructions For: Wrangler TJ Part Number: 51238 DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE. Parts List and Hardware Identification WARNING Windshield Header, Qty - 1, Part Number 378.36 This product is designed to enhance the appearance of the vehicle.
- Page 2 Hook into slot in windshield Note: While installing the Windshield Retainer/J-Hook Bracket Assembly, apply firm pressure toward the front of the vehicle to make sure that the assembly is installed correctly over the bulb seal. 0203 Rev. A 51238 pg 2...
Need help?
Do you have a question about the 51238 and is the answer not in the manual?
Questions and answers