Bestop 51254 RT Installation Instructions

Bestop 51254 RT Installation Instructions

Seat riser for: all jeep cj5s, cj7s and wranglers 1976-1995

Advertisement

®
For: All Jeep
CJ5s, CJ7s and Wranglers 1976-1995
®
Jeep
is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.
WARNING
Before you begin installing this seat riser, please read all
installation instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this riser on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially danger-
ous situation.
This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions pro-
vided when installing this product. Failure to do so may result
in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
51254/51253 pg 1
Seat Riser
Installation Instructions
Part Number: 51254 RT
51253 LT
0300 Rev. A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 51254 RT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bestop 51254 RT

  • Page 1 51253 LT ® Jeep is a registered trademark of Chrysler and Bestop is not affiliated with Chrysler Corporation. WARNING Before you begin installing this seat riser, please read all installation instructions and warnings thoroughly. This seat is designed to be used on the model vehicles described above.
  • Page 2 51253 LT 9/16 Wrench Jeep ® is a registered trademark of Chrysler and Bestop is not affiliated with Chrysler Corporation. WARNING Before you begin installing this seat riser, please read all installation instructions and warnings thoroughly. 13 MM Hex Socket Head This seat is designed to be used on the model vehicles described above.
  • Page 3 WARNING Failure to tighten the bolts and nuts to the specified torque can result in the seat loosening, thereby causing serious bodily injury to the vehicle occupants and to others. Step Two Install the new riser, attaching it to the floor with the four bolts removed from the old riser and torque to 34 ft/lbs.
  • Page 4 Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For further information or request for warranty work, please contact: Bestop Inc. Customer Service (800)346-3910 (303)465-1755 0300 Rev.

This manual is also suitable for:

51253 lt

Table of Contents