Seizmik 50-50225KIT Installation & Operation Manual

Toolless windshield

Download this manual

Installation & Operations Manual : Seizmik Toolless Windshield

Installation Information:

This product does not require any modifications to your vehicle. Please familiarize yourself with all the steps before

beginning assembly.

If you have any questions, comments, need assistance, or are missing parts, please visit our website

http://seizmik.com/customer-support

information on our product or call 1-866-838-3366 between 9:00AM and 5:00PM EST.

Note: Generic windshield

shown. Actual windshield for

your vehicle may look different

Installation:

1. Begin by rotating all clamps to their open position

towards the front of the windshield

Clamps for round tubing shown. Installation for profile tubing is the same.

Or email us at service@seizmik.com. Visit

2. Put windshield in place on the vehicle and snap

all clamps over the roll cage.

www.seizmik.com

for more

Need help?

Do you have a question about the 50-50225KIT and is the answer not in the manual?

Page 1 Installation & Operations Manual : Seizmik Toolless Windshield Installation Information: This product does not require any modifications to your vehicle. Please familiarize yourself with all the steps before beginning assembly. If you have any questions, comments, need assistance, or are missing parts, please visit our website http://seizmik.com/customer-support...
Page 2 Clamp Installation: The Seizmik Toolless Clamps should come fully assembled on your windshield. It is possible that one or more of the clamps could come apart during shipping. If this happens simply put the base back through the hole in the windshield,...