curt 13043 Manual

13043
3/26/2010
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM QTY PART NUMBER
1 4 M12-1.25 x 35mm HEX BOLT
2 4 1/2" CONICAL TOOTHED WASHER
TOOLS REQUIRED
RATCHET
TORQUE WRENCH
6" EXTENSION
19mm SOCKET
HITCH WEIGHT: 8 LBS.
INSTALL TIME
PROFESSIONAL: 15 MINUTES
NOVICE (DIY): 30 MINUTES
INSTALL NOTES:
- NO DRILLING REQUIRED
INSTALLATION STEPS
1. If needed, lower the spare tire and shift it towards the front of the vehicle and raise back up to create additional
space for hitch installation.
2. Raise hitch against the bottom of the bumper bracket and align the holes with the weldnuts.
3. Secure hitch in position using M12-1.25 x 35mm bolts and 1/2" conical toothed washers.
(SEE WELDNUT CLEANING)
4. Torque all 12mm hardware to 65 ft-lbs.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
LEXUS GX 460
DESCRIPTION
BUMPER BEAM
EXISTING WELDNUTS
BUMPER BEAM BRACKET
2
1
5,000 LBS. TRAILER WEIGHT &
5,000 LBS. TRAILER WEIGHT &
1-800-798-0813
500 LBS. TONGUE WEIGHT.
LBS. TONGUE WEIGHT
500