Download Print this page

curt 13052 Manual

Land rover lr2

Advertisement

Quick Links

13052
8/23/2010
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
ITEM
PART NUMBER
QTY
1
3
7/16-14 x 1 1/2
2
3
7/16
3
3
7/16-14
4
2
M14 - 2 x 120 HEX
5
2
9/16
6
2
9_16 WASHER USS FLAT
DRIVER SIDE FRAME RAIL
EXHAUST
HITCH WEIGHT:
26
LBS.
INSTALL TIME
PROFESSIONAL:
20
MINUTES
NOVICE (DIY):
40
MINUTES
INSTALL NOTES:
-NO DRILLING REQUIRED
INSTALLATION STEPS
1. It may be nessesary to clean the existing weldnuts on the driver side frame rail. (See WELDNUT CLEANING
diagram above)
2. Raise hitch over the exhaust on the driver side and install a M14 bolt in the rearmost existing weldnut.
3. Attach passenger side of hitch to the vehicle tie down bracket on passenger side frame rail using the 7/16"
hardware, as shown above.
4. Install the remaining M14 bolt in the driver side plate. NOTE: Exhaust may need to be pushed forward for this bolt
to be installed.
5. Torque all M14 hardware to 105 ft-lbs. and all 7/16" hardware to 50 ft-lbs.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
LAND ROVER LR2
Parts List
DESCRIPTION
HEX BOLT
WASHER
HEX FLANGE NUT
HEX TAP BOLT
LOCK WASHER
FLAT WASHER
EXISTING WELDNUTS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
4,000
LBS. TRAILER WEIGHT &
4,000
LBS. TRAILER WEIGHT &
TOOLS REQUIRED
RATCHET
22mm SOCKET
11/16" SOCKET
TORQUE WRENCH
TIE DOWN BRACKET
6
5
4
400
LBS. TONGUE WEIGHT.
LBS. TONGUE WEIGHT
400
1-800-798-0813
PASSENGER SIDE FRAME RAIL
1
2
3

Advertisement

loading
Need help?

Need help?

Do you have a question about the 13052 and is the answer not in the manual?

Questions and answers