Patch Assignment - DigiTech VALVEFX Owner's Manual

Valve FX Owner's Manual

PATCH ASSIGNMENT

The submenus included under the Foot Controller setup menu are:
Patch Assignment, Continuous Control Pedal, Program List
Assignment, and LED Assignment.
The Patch Assignment option allows any Patch in any Bank of the
Control One foot controller to recall a Valve FX Program number. To
illustrate, let's set Patch 7 of Bank 4 to recall Program 150 on the
Valve FX. The procedure is as follows:
• From the Program title screen, press <UTILITY> once. The dis-
play reads:
¡MIDI Contrst:4
™Foot £Tuner
• Press Function key 2 once. The display reads:
¡Patches ™CC Ped
£PrgList Assign≥
• Press Function key 1. The display reads:
¡Bank 1 ™Patch 1
£[PROG. NAME]
This screen means that Patch 1 in Bank 1 of the Valve FX is set
to recall Program 1 of the Valve FX.
• Since we need to assign Patch 7 in Bank 4, let's first select Bank
4 for editing. To do this, press Function key 1. Note that a cur-
sor appears under the number next to
• Use the <UP/DOWN> Cursor keys to select the Bank number for
editing (in this case, Bank 4).
• Press Function key 2. The cursor moves to the number next to
™Patch .
• Use the <UP/DOWN> Cursor keys to select the Patch you want
to assign (for this example, Patch 7). Again, as you change the
Patch designation, the Program number changes to reflect the
current assignment for the Patch.
• Press Function key 3. The cursor moves to the number next to
the Program name.
55
≥
1
¡Bank
Section 5 - The Utility Menu
.