Adjusting The Lcd Contrast; Output Mode - DigiTech VALVEFX Owner's Manual

64

ADJUSTING THE LCD CONTRAST

OUTPUT MODE

Section 5 - The Utility Menu
When you scroll down from 427 Hz, you will also find alternate tun-
ings. Alternate tunings are A , G, and G .
When you use any of the alternate tunings as your reference, tune
your instrument so that the display shows normal tuning (E, A, D, G,
B, E for guitars) and the Valve FX will do the rest (the display shows
normal tuning, but you'll actually be tuning to your selected reference
key).
The LCD CONTRAST adjustment control is used to adjust the angle at
which the display can be read most clearly. To change the LCD con-
trast, do the following:
• From the Program, press the <UTILITY> key once. The display
reads:
¡MIDI Contrst:4
™Foot £Tuner
The value indicates the current setting of the LCD contrast.
• Adjust the contrast using the Parameter <UP>/<DOWN> Cursor
keys until the display is easily readable.
• To return to your last position in the Program, press <UTILITY>.
The output option selects whether the outputs of the Valve FX are
summed to mono or not. For best results in mono applications, this
Parameter should be set to
Stereo (the factory default setting of this Parameter is
To change the output mode of the Valve FX, do the following:
• From the Program, press the <UTILITY> key once. The display
reads:
¡MIDI Contrst:4
™Foot £Tuner
• Press the <RIGHT> Cursor key once. The display reads:
¡Output:Stereo
≤™CabEm:Local
• Press Function key 1 until the top line of the display show the
desired output mode.
• Press the <UTILITY> key to return to your last position in the
Program.
Valve FX Owner's Manual
≥
Mono . If stereo output is desired, set it to
≥
≥
Stereo ).