curt 16424 Manual

FORD F-250, F-350 & F-450 (6 1/2' & 8' BOX)
16424
10/25/2017
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
Parts List
ITEM QTY PART NUMBER
1 4 1/2-13 x 1 1/2 CARRIAGE BOLT
2 4 CM-SP17 .250 x 1.25 x 2.50" SQUARE HOLE SPACER
3 10 1/2 - 13 x 2 CARRIAGE BOLT
4 10
CM-SP136 .313" x 1.00 x 2.00" U-SHAPE SPACER
5 10 CM-SP33 .250 x 1.50 x 2.00" SQUARE HOLE SPACER
6 14 HFN 1213 HEX FLANGE NUT
7 2 3_4 - 10 x 2 1/2 HEX HEX HEAD BOLT-NC
8 2 CM-SP41 .188 x 1.38 x 1.50" ROUND HOLE SPACER
9 2 3_4 - 10 HFN HEX FLANGE NUT
10 1 1_2 FISHWIRE 1/2" FISHWIRE
11 1 16424-SB SENSOR BRACKET 16GA. (.0598) A-36 H.R.
3
4
5
6
9
TOOLS REQUIRED
RATCHET
3/4" & 1 1/8" SOCKETS
CENTER PUNCH
DRILL
1/8" & 9/16" DRILL BITS
TAPE MEASURE
TORQUE WRENCH
HITCH WEIGHT: 24 LBS.
INSTALL TIME
75
PROFESSIONAL: MINUTES
NOVICE (DIY): 150 MINUTES
INSTALL NOTES:
- NO DRILLING INTO FRAME REQUIRED
- LOWER SPARE TIRE FOR EASE OF
INSTALLATION
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
DESCRIPTION
10
5TH WHEEL MOUNTING RAILS
(SOLD SEPERATLY)
MARK AND PUNCH THIS HOLE 1ST
7
PASSENGER SIDE FRAME RAIL
DRIVER SIDE FRAME RAIL
EXISTING HOLE IN FRAME (ALL)
SENSOR CONTROL MODULE RELOCATION DIAGRAM
(ONLY APPLICABLE ON CERTAIN MODELS)
INCLUDED SENSOR RELOCATION BRACKET
PASSENGER SIDE FRAME RAIL
(BOTH SIDES)
8
2
1