curt 16210 Manual

16210
3/02/2012
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
ALIGN PIN OF
GOOSENECK
WITH SLOT IN BALL
HITCH WEIGHT: 100 LBS.
INSTALL TIME: 10 MINUTES
INSTALL NOTES:
- NO DRILLING REQUIRED
INSTALLATION STEPS
NOTE: Bed liners and bed mats may affect fit of X5.
1. Remove existing ball from gooseneck, leaving the handle in the "unlocked" position. Return ball to
vehicle owner for future gooseneck use.
2. Install X5 5th wheel adapter plate into gooseneck cylinder and rotate double lock handle to lock unit.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
X5 5TH WHEEL ADAPTER PLATE
20,000
LBS. TRAILER WEIGHT &
4,000
LBS. TONGUE WEIGHT.