Optional Passive Volume/Continuous Control Pedal; Factory Reset - DigiTech RP155 Owner's Manual

Optional Passive Volume/Continuous Control Pedal

Connect a passive volume or continuous control pedal to the RP155's Control In jack to control
the RP155's Volume, Wah, or Whammy™ in real time with your foot. Turn on the Wah or Wham-
my to control it with the optional pedal, or turn on both the Wah and the Whammy to control
both simultaneously. When a pedal is connected and neither the Wah nor the Whammy effects are
activated, the pedal controls the RP155's volume by default.

Factory Reset

This function resets the RP155 to its original factory settings. This procedure erases all custom
User presets.
ATTENTION: Performing this function will erase all user-programmed data. All
such data will be lost forever! Be sure you want to erase the memory and start fresh
before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP155.
2. When the display prompts you with FR, release the Store button, which is now flashing.
3. Press and hold the flashing Store button for 3 seconds until RS appears in the display and
release. The Factory Reset procedure takes approximately 10 seconds.
38