Stereo Voice Panning; Storing Your Programs; The Optional Footswitch And Micstand Mount - DigiTech VOCALISTPERF Manual

To create a program with unique settings for the A and B parts, press the Part A button and select
settings that will work for the main part of your song. Now press the Part B button and do the same
for the alternate harmony. Store as described below. When you change programs using the data
wheel, Part A is automatically loaded first.

Stereo voice panning

All stereo panning is pre-set in Performer. Your input voice is panned center and the harmony voice
pan position depends on how many voices are on. When only one harmony voice is activated, it will
be panned to the center. Two harmony voices will be panned hard right and left. If you prefer the
harmony voices to appear closer to the center of the stereo image, adjust the pan controls on your
mixer accordingly.
Although there is no built-in way to adjust the volume difference between any two harmony voices,
you can use this mixer trick to adjust the volume relationship between them:
First of all, connect Performer according to the Studio/Alternate live setup graphic at the beginning
of this manual. Turn up the effects send control on the channel your mic is connected to.
Set the pan controls for the on the mixer to the center. Set Performer up for a two-voice harmony
and sing. You can now adjust the volume of each voice using the two faders on the mixer.

Storing your programs

When you've found a selection of songs you would like have Performer sing with you, you can
store the Key, Scale and Harmony settings into a memory slot for instant recall at your next perfor-
mance. Press the Store button when you have found settings you like. This will cause the program
number to flash. At this point you can choose to store your settings at this location by pressing Store
again or use the Data Wheel to find another location before pressing Store again.
Although Performer can be easily used without programming, you may find it easier to write down
the program number you have chosen for each song to save you from having to remember exactly
what your settings were.
The optional Footswitch and Mic Stand Mount
If you perform live, it is strongly recommended that you invest in the FS300 footswitch. The FS300
has three buttons that allow you to bypass the harmony voices, switch between the A and B parts of
each program and mute the reverb effect to talk to your audience between songs.
The Mic Stand Mount is handy if you have nothing to rest Performer upon. It brings all the controls
within easy reach.
10
••• •••