Step Filter; Digitech Whammy - DigiTech RP155 Owner's Manual

Step Filter (sf)
The Step Filter is like an automatic "random wah" with a square waveform.
Speed - Knob 2 adjusts the speed of the Wah effect. Ranges from 0 to 99.
Intensity - Knob 3 controls the intensity of the Wah effect. Ranges from 0 to 99.
DigiTech Whammy™ (wH)
The DigiTech Whammy
coming signal, or add a bendable harmony with the original signal. As the Pedal is moved, the note
bends either up or down. When DigiTech Whammy is selected, it is automatically placed before
the Amp modeling as shown in the block diagram on page 19.
Shift Amount - Knob 2 selects the interval and direction of the pitch bend. Choices are
as follows:
Whammy (no Dry Signal)
TM
ou (1 octave above)
2o (2 octaves above)
2d (a second below)
d2 (a second below reversed pedal action)
4d (a fourth below)
od (an octave below)
o2 (2 octaves below)
DB (Dive Bomb)
Pedal Position - Knob 3 provides a manual control of the Whammy pedal position.
Ranges from 0 to 99.
Mix - Knob 4 adjusts the Whammy mix. Ranges from 0 to 99.
is an effect that uses an Expression Pedal to bend the pitch of the in-
TM
Harmony Bends (Dry Signal Added)
m3 (a minor third to a Major third)
23 (a second above to a Major third above)
34 (a third above to a fourth above)
45 (a fourth above to a fifth above)
5o (a fifth above to an octave above)
hu (one octave above)
hd (one octave down)
ud (octave up/down)
31