Distortion Model Descriptions - DigiTech Distortion Factory DF-7 Owner's Manual

14. OUT 2 (MIXER)
This output has been specifically
designed for use with a full range
audio system. It is designed to be
plugged directly into a mixer or
recording device for optimal
performance. Each MODEL features
a specific cabinet model when using
this output. (See Flexible
Output Mode and Stereo
Spectrum Set-up sections.)

Distortion Model Descriptions

DISTORTION MODEL 1
Based on the Ibanez
TS-9 Tube Screamer*
This model recreates the vibe of the
Ibanez TS-9 Tube Screamer*, famous for
delivering a warm, natural tube
®
overdrive sound. It is ideal for boosting
your signal without adding a lot of
distortion.
For this model, the DF-7's GAIN,
HIGH, and LEVEL knobs function
like the TS-9*'s Overdrive,Tone, and
Level controls, respectively.The DF-7
also features separate LOW, MID,
and MID FREQ controls giving you
added EQ flexibility so you can
customize the model to suit you taste.
Set the DF-7's LOW, MID, MID
FREQ, HIGH, and GAIN knobs to
the 12 O'Clock position to accurately
reproduce this pedal model.
When this model is selected, the CIT
cabinet model used in Flexible
Output Modes 1 and 2 is based on