HUSKY LINERS Weather BEATER 13941 Care And Use Instructions

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Toyota Tacoma. The liners are made to take the place of your factory
floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
well. Use of Armor All
INSTALLATION INSTRUCTIONS FOR YOUR
LEFT OR DRIVER'S SIDE
YOUR TOYOTA TACOMA MAY HAVE A FACTORY MAT RETAINER INSTALLED THAT COULD AFFECT
THE FIT OF YOUR LINER. PLEASE READ THE INSTALLATION NOTES FOR EACH TYPE OF FACTORY MAT
RETAINER BEFORE INSTALLING YOUR LINERS:
IF YOU HAVE THE FACTORY "CARPET HOOKS"— REMOVE THESE HOOKS TO ALLOW PROPER FIT.
THIS IS EASILY DONE BY PULLING THE L-SHAPED HOOK DIRECTLY TOWARD THE MOUNTING HOLE.
THIS WILL ALLOW THE HOOK TO "POP" OUT OF THE RETAINING GROMMET. THE HOOKS CAN BE
STORED IN YOUR GLOVE BOX FOR REPLACEMENT AT A LATER DATE.
IF YOU HAVE THE FACTORY "TWIST-LOCK" RETAINERS, YOUR LINER WILL NEST OVER THE TOP OF
THE RETAINERS BUT FIRST YOU MUST ORIENT THE TOP PORTION OF THE TWIST-LOCK RETAINERS SO
THEY ARE ALIGNED WITH THE BASE (ARROWS WILL BE POINTING HORIZONTALLY).
CARE AND USE INSTRUCTIONS
® ®
, Son-of-a-Gun or similar items is discouraged as these products make the liners slick.
TOYOTA TACOMA FRONT FLOOR LINERS
®
or Glass Plus
RIGHT OR PASSENGER'S SIDE
1394_Installation Instructions 11_30_2014
®
work