Fenix E09R Manual

E09R
RECHARGEABLE
MINI
HIGH-OUTPUT
FLASHLIGHT
600 LUMENS MAXIMUM
OUTPUT
124 METERS MAXIMUM
BEAM DISTANCE
(ENGLISH) FENIX E09R FLASHLIGHT
◎ 600 lumens maximum output, 124 meters maximum beam
distance.
◎ Luminus SST20 LED with a lifespan of 50,000 hours.
◎ Built-in 800mAh Li-polymer battery.
◎ Hidden USB Type-C charging port.
◎ Metal switch for on/off and output selection.
◎ Instant Burst.
◎ High-efficiency lens with a total reflective coating.
◎ Made of durable A6061-T6 aluminum.
◎ Premium type HAIII hard-anodized anti-abrasive finish.
◎ Size: 3.11'' x 0.76'' x 0.72'' / 79 x 19.3 x 18.4 mm.
◎ Weight: 1.59 oz / 45 g.
OPERATING INSTRUCTION
On/off
Press and hold the side switch for 0.5 seconds to turn on/off the
light.
Output Selection
With the light switched on, single click the side switch to cycle
through Moonlight→Low→Med→High.
Instant Burst
Press and hold the side switch for 1.2 seconds to enter instant
Burst, release it the light will turn back to Moonlight mode.
Lock/Unlock
Lock: with the light switched off, double click the switch within
0.5 seconds to lock the light, the light will blink twice on Moonlight
to indicate locked status.
Hidden built-in USB Type-C charging port
Press and hold for 0.5s
Luminus SST20 LED
Press and hold for 1.2s
Output: lumens
300
100
25
3
1.5h 4h
TECHNICAL PARAMETERS
ANSI/PLATO FL1 BURST HIGH
OUTPUT 600 lumens 300 lumens
RUNTIME
/ 1.5 hours *
DISTANCE 124 meters 91 meters
INTENSITY 3970 candela 2084 candela
IMPACT RESISTANCE
SUBMERSIBLE
Note: According to the ANSI/PLATO FL1 standard, the above specifications are from the results produced by Fenix through its laboratory testing using the built-in 800 mAh
Li-polymer battery under the temperature of 21±3°C and humidity of 50% - 80%. The true performance of this product may vary according to different working environments.
*The High output is measured in a total of runtime including output at reduced levels due to temperature or protection mechanism in the design.
Unlock: with the light locked, double click the switch within 0.5
seconds, the light will be unlocked and activated on Moonlight.
*In locked status, clicking or pressing the switch will activate 2 one-second blinks
on Moonlight to indicate locked status.
Intelligent Memory Circuit
The light memorizes the last selected output excluding burst.
When turned on again the previously used output will be recalled.
CHARGING
1. First loosen the light body to reveal the USB Type-C charging
port and plug the USB A socket of the charging cable into an
electrical outlet, then connect the USB Type-C socket of the
charging cable to the light.
2. The indicator will display red while charging and will turn green
when fully charged.
3. Once charging is completed, be sure to tighten the light head
to maintain the dustproof and waterproof ability.
OFF
Low
single click
ON Moonlight
Med
INSTANT
release High
BURST
High
Med
Low
Moonlight
16h 70h Runtime: hours
MED LOW MOONLIGHT
100 lumens 25 lumens 3 lumens
4 hours 16 hours 70 hours
56 meters 28 meters 9 meters
777 candela 192 candela 20 candela
1 meter
IP68
Note:
1. Charge the light timely when the battery power gets too low to
ensure the normal life of the battery.
2. The normal charging timeis approximately 1 hour from
depletion to full charging.
3. Recharge a stored light every four months to maintain the
optimum performance of the battery.
INTELLIGENT OVERHEAT PROTECTION
The light will accumulate a lot of heat when used at High mode
for extended periods. When the light reaches a temperature of
60°C or above, the light will automatically step down a few
lumens to reduce the temperature. When the temperature drops
below 60°C, it will then allow the user for the reselection of the
mode.
LIGHTING FOR EXTREMES
FACEBOOK WECHAT
"Follow" us for more information about Fenix.
FENIXLIGHT LIMITED
Tel: +86-755-29631163/83/93 Fax: +86-755-29631181
E-mail: info@fenixlight.com Web: www.fenixlight.com
Address: 2F/3F, West of Building A, Xinghong Technology
Park, 111 Shuiku Road, Fenghuanggang Community,
Xixiang Street, Bao'an District, Shenzhen City, Guangdong
Province, China
61.149.221.014-A1-20210312
USAGE AND MAINTENANCE
◎ Disassembling the sealed head can cause damage to the light
and will void the warranty.
◎ Lock the light to prevent accidental activation during storage
or transportation.
◎ Long-term use can result in O-ring wear. To maintain a proper
water seal, replace the ring with an approved spare.
INCLUDED
Fenix E09R flashlight, USB Type-C charging cable, Key chain,
Spare O-ring, User manual, Warranty card
WARNING
!
◎ The flashlight is a high-intensity lighting device capable of
causing eye damage to the user or others. Avoid shining the light
directly into anyone's eyes.
◎ This flashlight will accumulate a lot of heat when used for
extended periods, resulting in a high temperature of the flashlight
shell. Pay attention to safe use to avoid scalding.
◎ Do not shine an object at close range, to avoid burning the
object or causing danger due to high temperature.
◎ The LED of this flashlight is not replaceable; so the entire light
should be replaced when the LED reaches the end of its life.
◎ If any of the information provided in this manual is changed,
the new version of the manual shall prevail; if your included user
manual is an old one, it acquiesces that we won't send a new
manual.