NORTH STATES Extension 4900 Instructions

For helpful tips and instructions, please visit our website: www.northstatesind.com
or contact our Customer Care department via email: CustomerService@northstatesind.com
NOTE: When using multiple extensions, place as equally as possible on either side of the gate frame.
Installation and Operation
Step 1: Measure the width of the opening where you intend to install the gate. Please refer to the chart below to determine the
correct installation configuration.
Step 2: To add an extension to the gate, insert the extension pins into the holes on the outside of the gate frame. Next, slip the
extension over the pins. Finally, slide the spindles with tension knobs into the holes on the outside of the extension.
Gate frame
North States Industries, Inc. I
Rev 2/2022
Instructions for Extension 4900
For use with gate models: 4916, 4917
Important: Please keep for further reference.
Phone (763) 486-1754 or Toll Free: (800) 848-8421
The maximum number of extensions that can be used with this gate is three.
Extensions Needed
None
2-Bar
2-Bar + 2-Bar
5-Bar
2-Bar + 5-Bar
2-Bar + 2-Bar + 5-Bar
2-Bar + 5-Bar + 5-Bar
5-Bar + 5-Bar + 5-Bar
Distributed exclusively in the United States by
5455 Highway 169 N, Plymouth, MN 55442
Manufactured in China
Opening Size Range
28.25" – 30.75"
31.75" – 34.25"
35.25" – 38.25"
41.75" – 44.25"
45.25" – 47.75"
48.75" – 51.25"
58.75" – 61.25"
68.75" – 71.25"
I www.northstatesind.com
2-Bar
3 ¾" Extension
(2 Extensions included with gate)
Model 4900
5-Bar
13 ½" Extension
(sold separately)