Advertisement
Quick Links
YEARS: 2012-CURRENT
MAKE:
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
WEIGHT CARRYING:
INSTALLATION TIME:
THE
INSTALL TIME LISTED IS FOR NOVICE /
PROFESSIONAL INSTALLERS. IF YOU ARE HESITANT
TO UNDERTAKE THIS TASK ON YOUR OWN, CONTACT
AN AUTHORIZED CURT INSTALLER FOR ADDITIONAL
ASSISTANCE.
INSTALLATION REQUIRES:
TORQUE
RATCHET
WRENCH
10"
SAFETY
SOCKET
GLASSES
EXTENSION
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace
the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement
of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
11354
INSTALLATION INSTRUCTIONS
MODEL: BEETLE CONVERTABLE (ALL), BEETLE HATCHBACK (GAS TURBO ONLY)
VOLKSWAGEN
TRAILER WEIGHT:
1,500
TONGUE WEIGHT:
150
15/30
MIN.
INSTALLATION TIPS:
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 800.798.0813
18mm
3/4"
LEVEL OF DIFFICULTY:
EASY
SOCKET
PART REMOVAL
WARNING:
LBS.
WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER
(WHEEL-LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT
LBS.
WWW.CURTMFG.COM FOR FURTHER INFORMATION.
EASY
MODERATE
CHALLENGING
REVERSE FISHWIRE
HARDWARE
CLEAN EXISTING
WELDNUTS
REMOVE EXISTING BOLT
NO DRILLING REQUIRED
Safety glasses should be
worn at all times while
installing this product .
VEHICLE PHOTO:
REPRESENTATIVE PHOTO
HITCH ILLUSTRATION:
MAKE SURE YOUR HITCH MATCHES
STYLE:
ALL
4/10/2013
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for curt 11354
Summary of Contents for curt 11354
- Page 1 CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace...
- Page 2 INSTALLATION WALKTHROUGH: 1. Remove existing bolt from driver and passenger side of Parts List ITEM PART NUMBER DESCRIPTION vehicle. Retain bolt for hitch installation. CM-SP17 .250 x 1.25 x 2.50" SQUARE HOLE SPACER 1/2-13 x 1 1/2 CARRIAGE BOLT HFN 1213 HEX FLANGE NUT 1_2 FISHWIRE 1/2"...
- Page 3 INSTALLATION WALKTHROUGH: 3. Raise hitch into position. Secure hitch with 1/2"-13 hex flange 5. Installation is now complete. nuts onto carriage bolts. Install factory M12 bolts from Step 1 through hitch and into existing vehicle weldnuts. 4. Torque 1/2"-13 hardware to 110 lb-ft and M12-1.50 hardware to 83 lb-ft.
-
Page 4: Installation Steps
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND. Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase.
Need help?
Do you have a question about the 11354 and is the answer not in the manual?
Questions and answers