Assigning The Channel Keys To A Different Device; Assigning The Vcr/Dvd Keys To Control Your Vcr Or Dvd; Low Battery Warning; Memory Lock System - Universal Remote Control UR3-SR3 Operating Manual

G. Assigning the Channel keys to a
G. Assigning the Channel keys to a
Dif fer ent Device
Dif fer ent Device
By default, the CH+, CH-, NUMERIC and LAST keys
operate through your Cable Box. If you would like those
keys to operate those functions on a different device,
follow these steps.
STEP1
Press the [OK/SEL] button and [CBL] button
simultaneously for three seconds. The device
LED will turn on for 20 seconds. The next step
must be performed while the LED is on.
STEP2
Press the [VOL -] button. The device LED will
blink.
STEP3
Press the [TV] button. The device LED will blink
twice to confirm the programming.
*Note : If you wish to have the channel keys operate your
Cable Box, press the [CBL] button instead of the
[TV] button in Step 3.
H. Assigning the VCR/DV
H. Assigning the VCR/DV
contr ol your VCR or DVD
contr ol your VCR or DVD
By default, the REW, Play, FF, Record, Stop and Pause keys
operate VOD (Video On Demand) through your Cable Box.
If you would like those keys to operate those functions on
your DVD or VCR, press the PLAY button for 3 seconds
until the DVD/VCR button lights. To return to your Cable
Box control, press the PLAY key again for 3 seconds until
the CBL button lights.
I. Low Batter
I. Low Batter
When the battery is low (2.3V-2.0V) and needs to be
replaced with fresh batteries, device LED will blink 2 times
in sequence whenever a [DEVICE] button is pressed to
turn on equipment.
J. Memor
J. Memor
This remote control is designed to retain programmed
memory for 10 years — even after batteries are removed
from the remote control.
y W ar ning
y W ar ning
y Lock System.
y Lock System.
D VOD keys to
D VOD keys to
7