Introduction This remote control is designed to operate most Digital and Analog Cable Boxes, as well as TVs, and a VCR or DVD player. Replacing Batteries Before you program or operate the remote control, you must install two new AAA alkaline batteries. STEP1 Remove the battery compartment cover from the back of your remote control.
Button Functions Programming the Remote Control. *Note : In this section, when you are instructed to press a [DEVICE] button, that means you should press either the CBL, TV, or DVD button, depending on which device you are programming the remote to operate. A.
Page 4
STEP2 Press the [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.
Page 5
To access the programmed channels, press the [MACRO] button once. This will bring up the first channel. Press once again and it will bring up the second channel. Press again and it will bring up the third channel. To erase the Macro programming and return to the original function: STEP1 Press the [CBL] button to select the CABLE mode.
Set-up Code Tables CABLE TV CONVERTER MAKER(BRAND) NAME SCIENTIFIC ATLANTA EXPLORER Series 8600X 8600 8540,8570,8590 8500 MOTOROLA DCT Series (DVR Model) GENERAL INSTRUMENT VIP Series JERROLD DCT Series,CFT2200 BMC9012/BMC9022 DSR470 CFT2000 DL4,DP(V),DQN(V),DPBB Some Model ADB Series AMINO AmiNET Series AT&T U-VERSE HAMLIN CR6000...
Need help?
Do you have a question about the Easy Clicker OCE-0009D and is the answer not in the manual?
Questions and answers