Setting The Lcd - Universal Remote Control Complete Control KP-900 Owner's Manual

Setting the LCD

With these settings, you can set the KP-900 to constantly display the LCD
when not in use, or show a blank screen when not in use. Additionally, you
can control the contrast of the screen and the color of the backlighting.
LCD
LCD ON
CONT
COLOR
EXIT
LCD
OFF
TIMER
10S
SAVE
EXIT
KP-900 O M
WNERS ANUAL
To activate the LCD On/Off setting, press
this button. See below.
To activate the CONTRAST setting, press
this button. See the next page.
To activate the COLOR setting, press this
button. See the next page.
To exit without saving any changes you
have made, press EXIT.
LCD Timer Setting:
If you set the LCD to OFF, the timer set-
tings will appear. The LCD will go blank
after waiting the interval you set here by
adjusting the LEFT and RIGHT arrow keys.
The timer can be set to turn off the LCD
between 10 seconds and 20 minutes.
The Timer Interval is displayed here.
To save any changes you have made,
press SAVE.
To exit without saving any changes you
have made, press EXIT.
To change the timer interval, press the
LEFT or RIGHT arrow keys.
Page 8