Setting The Time; Setting The Lcd - Universal Remote Control Medius TX-1000 Complete Control Owner's Manual

Setting the TIME

You can correct the time displayed by changing the settings on this screen.
To activate the
AM/PM setting,
press this button. .
To activate the
HOUR setting,
press this button.
To activate the
MINUTE setting,
press this button.
To SAVE any
changes you have
made, press SAVE.

Setting the LCD

With these settings, you set the screen's appearance when the Medius is not
in use. You can select either a blank or constant LCD display. Additionally,
you can control the contrast of the screen and the color of the backlighting.
To activate the LCD
On/Off setting,
press this button. .
To activate the
CONTRAST setting,
press this button.
For COLOR set-
tings, see the next
page.
To SAVE any
changes you have
made, press SAVE.
To exit without sav-
ing any changes you
have made, press
EXIT.
M O M
EDIUS WNERS
Page 8
ANUAL
AM/PM, press this
UTES by observing
To exit without sav-
ing any changes you
After activating LCD
whether the LCD is
displayed when not
Press the TIMEOUT
button if you wish to
change how much
TRAST by observing
After activating
button to change
AM/PM.
After activating
them, change the
HOURS or MIN-
these buttons and
adjusting with the
LEFT and RIGHT
arrow keys.
have made, press
EXIT.
On/Off, press this
button to change
in use.
time must pass
before the Medius
turns the LCD off.
After activating
change the CON-
this button and
adjusting with the
LEFT and RIGHT
arrow keys.