Sound Volume; Light Settings - Universal Remote Control Complete Control KP-900 Owner's Manual

Light Settings

You can adjust the backlighting of the remote in two additional ways:
1. You can turn on/off the LCD and the hard button backlighting.
2. You can select the amount of time the lighting stays on after the last button
press from a range of values between 10 seconds and 90 seconds.
LIGHT
ON
TIMER
10S
SAVE
EXIT

Sound Volume

Your KP-900 beeps whenever a button is pressed. However, you can adjust
the volume of the beep to one of four levels as shown here:
SOUND
VOLUME
SAVE
EXIT
KP-900 O M
WNERS ANUAL
Page 10
Change whether the backlight-
ing is on or off by pressing this
button.
If you want the backlighting
always OFF, set it to OFF.
If you would like the backlight-
ing on, select ON.
The current timer setting is
displayed here in seconds.
Adjust the backlighting timer setting
with the LEFT and RIGHT keys as
shown in the previous pages.
OFF
SLIGHT BEEP
MODERATE BEEP
LOUDEST BEEP
The current Beep volume is dis-
played here as a "bar".
Adjust the volume of the beep by
tapping the LEFT and RIGHT arrow
keys as shown in the previous
pages.