Antenna Connection; Power Connection - Sanyo LCD-32R45F Instruction Manual

Preparations

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and position of the antenna will depend upon your particular area.
Wall Antenna Socket
Note:
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
=
conditions.
The antenna cable should not be bundled with the power cord and the like.
=
If the antenna is not installed properly, contact your dealer for assistance.
=

Power Connection

Connect the power cord to the AC IN jack, then plug the other end into a power outlet.
Household
power outlet
Plug into AC outlet.
Note:
This illustration is for reference only. The AC plug may be different on different models.
=
This product should be operated only from the type of power source indicated on the marking label.
=
Always unplug the AC cord from power outlet when not using for a long period of time.
=
(Continued)
RF Coaxial Cable(75 ohm)
AC cord
TV REAR
AC IN
8