Antenna Connection; Power Connection - Sanyo LCD-26XR9DA Instruction Manual

Sanyo lcd tv instruction manual
Hide thumbs Also See for LCD-26XR9DA:
Table of Contents

Advertisement

Preparations

Antenna Connection

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and position of the antenna will depend upon your particular area.
TV REAR
RF
Note
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
=
conditions.
The antenna cable should not be bundled with the power cord.
=

Power Connection

1. Connecting the female plug to the AC socket on the unit.
2. Connecting the male plug to the wall outlet as illustrated.
Note
This product should be operated only from the type of power source indicated on the marking label.
=
Always unplug the AC cord from power outlet when not using for a long period of time.
=
This illustration is for reference only. The AC plug may be different on different models.
=
(continued)
75-ohm coaxial cable (round cable)
Plug into AC outlet
AC cord
5
Household
power outlet

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcd-32xr9da

Table of Contents