1. Manuals
  2. Brands
  3. Elecom Manuals
  4. Mouse
  5. M-XGXL50MBS Series M-XGS50MBS Series
  6. User manual

Elecom M-XGXL50MBS Series M-XGS50MBS Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you very much for purchasing this product.
* Each of the "M-XGS50MBS/M-XGM50MBS/M-XGL50MBS/M-XGXL50MBS" series is referred to as "this product" in this manual except in
some cases.
Precautions
This manual describes the important precautions you should take for safe operation of this product.
Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.
Meaning of symbols
DANGER
Failure to adhere to the precautions listed here carries the high risk of severe injury or death due to fire, electric shock, or other
causes.
WARNING
Failure to observe precautions carries the possibility of serious personal injury or death due to fire, electric shock, or other causes.
CAUTION
SAMPLE
User Manual
M-XGXL50MBS, E01A
Wireless Mouse

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M-XGXL50MBS Series M-XGS50MBS Series and is the answer not in the manual?

Questions and answers

Related Manuals for Elecom M-XGXL50MBS Series M-XGS50MBS Series

Summary of Contents for Elecom M-XGXL50MBS Series M-XGS50MBS Series

  • Page 1 SAMPLE Wireless Mouse User Manual M-XGXL50MBS, E01A Thank you very much for purchasing this product. * Each of the “M-XGS50MBS/M-XGM50MBS/M-XGL50MBS/M-XGXL50MBS” series is referred to as “this product” in this manual except in some cases. Precautions This manual describes the important precautions you should take for safe operation of this product. Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.
  • Page 2 Failure to observe precautions may result in personal injury due to electric shock or other causes, and may damage other equipment. Prohibited action Mandatory action Situation that needs attention Notes and reference information DANGER Please use the charging cable included with this product and observe our specified charging conditions. Usage of other charging cables or failure to observe our charging conditions may cause the battery to overheat, leak, or rupture.
  • Page 3 Do not put this product in fire. Ruptures may cause fire or injury. CAUTION Do not place this product in any of the following environments: In a car exposed to sunlight or a place exposed to direct sunlight. In a place that becomes hot, such as around a heater. In a moist place or a place where condensation may occur.

  • Page 4: How To Use

    * ELECOM is not liable for any accidents or any indirect or consequential damage incurred due to the failure of this product. How to use Items included in this package The following are included in this package.
  • Page 5 You can scroll horizontally by tilting the wheel to the left or right. You will need to install the “ELECOM Mouse Assistant Windows version” from our website to use the left and right scroll function on Windows. Please refer to “Install ELECOM Mouse...

  • Page 6: ''Forward'' Button

    ''Back'' button Continue to next page. Return to previous page. You will need to install the “ELECOM Mouse Assistant Mac version” from our website to use the “Back” and “Forward” button on Mac. Please refer to “Install ELECOM Mouse Assistant”.

  • Page 7: Receiver Unit

    The status light will light up when the CONNECT button is selected. During pairing standby state, the status light will blink. The status light will light up for a period of time when the mouse is switched ON. The status light will blink during use when the battery level is low. Bluetooth connection : Blue Wireless connection...

  • Page 8: Charge The Battery

    Switching back to the channel paired with a connected device will restore the connection. To pair, please refer to “How to use” → “Connecting and setting up the mouse” → (OS specific) → “3. Pair with PC”. Connecting and setting up the mouse Windows®...

  • Page 9: Turn The Power On

    Do not touch the terminal portion of the USB connector. 3) Turn on the power of the PC, if it has not been already switched on. The LED light will flash slowly when charging begins. It turns off when charging is complete. It will take approximately x hours until full charge.
  • Page 10 *Screen shots will be replaced with English versions. 2) Click on “Bluetooth & devices”. The “Devices” page will appear. If “Bluetooth” is off, turn it on. 3) Click on “Add device”.
  • Page 11 *Screen shots will be replaced with English versions. 4) Using the CONNECT button, select the device ( ) you want to connect to. The LED light and the status light will light up blue for 3 seconds. Please refer to “Switch connected device” to switch between connected devices. The selected connected Bluetooth device will be registered under your paired devices.
  • Page 12 *Screen shots will be replaced with English versions. CONNECT button 7) Click on “ELECOM OpticalMouse”. Pairing begins. 8) When the message changes to “Your device is ready to go!”, click “Done”. 9) Pairing is complete when this product is added to “Bluetooth & devices” and the status is “Connected”.
  • Page 13 *Screen shots will be replaced with English versions. You can now use the mouse. By downloading and installing the "ELECOM Mouse Assistant" from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse Assistant”. Using wireless connection...
  • Page 14 port Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector.
  • Page 15 4) The driver will be automatically installed, and you will then be able to use the mouse. You can now use the mouse. By downloading and installing the "ELECOM Mouse Assistant" from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse...
  • Page 16 *Screen shots will be replaced with English versions. 3) Adjust the “Mouse pointer speed” slider bar to adjust the mouse pointer movement speed. ■ For Windows 10 1) Open “Mouse” properties. From the start menu, click the Settings icon, select “Devices” → “Mouse”, then click “Additional mouse options” under “Related Settings”.
  • Page 17 *Screen shots will be replaced with English versions. Change the number of lines scrolled in one wheel turn ■ For Windows 11 1) Click on “Start” on the bottom of the screen and click on “Settings”. The “Settings” page will appear. 2) Click on “Bluetooth & devices” and then “Mouse”. 3) Adjust the “Lines to scroll at a time”...
  • Page 18 *Screen shots will be replaced with English versions. ■ For Windows 10 1) Open “Mouse” properties. From the start menu, click the Settings icon, select “Devices” → “Mouse”, then click “Additional mouse options” under “Related Settings”. 2) Select the “Wheel” tab. 3) Change the value of “The following number of lines at a time” under “Roll the wheel one notch to scroll” Using Bluetooth connection Charge the battery 1) Connect the rechargeable USB Type-C connector of the included charging cable to the USB Type-C port of...
  • Page 19 2) Connect the USB-A connector on the included charging cable to the USB-A port on your PC or a portable USB charger. Connecting to a PC port Connecting to a portable USB charger port Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector.
  • Page 20 It will take approximately x hours until full charge. If the LED light does not stop blinking even after the prescribed charging time, remove the charging USB cable and stop charging for the moment. Otherwise, this can cause overheating, rupturing or fires. Turn the power ON 1) Slide the power switch on the underside of the product to the ON position.
  • Page 21 *Screen shots will be replaced with English versions. 2) Click on “Bluetooth” to turn on “Bluetooth”. The “Bluetooth” system settings page will appear. 3) Using the CONNECT button, select the device ( ) you want to connect to. The LED light and the status light will light up blue for 3 seconds. Please refer to “Switch connected device”...
  • Page 22 6) Pairing is complete when the status of “ELECOM OpticalMouse” changes to “Connected”. You can now use the mouse. By downloading and installing the "ELECOM Mouse Assistant" from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse...
  • Page 23 2) Connect the USB-A connector on the included charging cable to the USB-A port on your PC or a portable USB charger. Connecting to a PC port Connecting to a portable USB charger port Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector.
  • Page 24 It will take approximately x hours until full charge. If the LED light does not stop blinking even after the prescribed charging time, remove the charging USB cable and stop charging for the moment. Otherwise, this can cause overheating, rupturing or fires. Turn the power ON 1) Slide the power switch on the underside of the product to the ON position.
  • Page 25 4) The driver will be automatically installed, and you will then be able to use the mouse. You can now use the mouse. By downloading and installing the "ELECOM Mouse Assistant" from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse...

  • Page 26: Iphone, Ipad

    *Screen shots will be replaced with English versions. Unchecking “Natural scrolling” will cause the scroll direction to be reversed. iPhone, iPad Charge the battery 1) Connect the rechargeable USB Type-C connector of the included charging cable to the USB Type-C port of this product. 2) Connect the USB-A connector on the included charging cable to the USB-A port on your PC or a portable USB charger.
  • Page 27 port Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector.
  • Page 28 *Screen shots will be replaced with English versions. Pairing with an iPad or an iPhone Pairing involves registering Bluetooth devices (in this case, this product and an iPad or an iPhone) with each other, and authorizing a connection between them. Tap to operate the iPad or iPhone device until pairing is complete. The following instructions are for iPadOS Ver.16.5.
  • Page 29 *Screen shots will be replaced with English versions. CONNECT button 5) Tap on "ELECOM OpticalMouse" when it is detected under "DEVICES". Pairing begins. 6) When the “Bluetooth Pairing Request” page loads, tap on “Pair”. 7) You can use the mouse when the status shows "Connected"...
  • Page 30 *Screen shots will be replaced with English versions. You can now use the mouse. Register custom actions to the buttons. Only the 2 buttons and the wheel can be used under the initial settings. Button 1: Single-Tap Button 2: Secondary Click Follow the steps below to assign all other button functions. Turn ON AssistiveTouch.
  • Page 31 *Screen shots will be replaced with English versions. 4. Tap on “AssistiveTouch” to turn ON. 2. Assign custom actions to the buttons. 1) Tap on “Devices” under “POINTING DEVICES”. 2) Tap on “ELECOM OpticalMouse”.
  • Page 32 *Screen shots will be replaced with English versions. 3) Tap on “Customize Additional Buttons...”. 4) When the “Customize Button” page loads, click on the button on the mouse to be added. * When adding “Button 3”.
  • Page 33 *Screen shots will be replaced with English versions. Button 3 5) A list of all assignable functions will load. Tap on the desired function to assign. * When assigning “Screenshot” to “Button 3”. 6) A function is assigned to the button. To assign other buttons, repeat the steps above. When AssistiveTouch is OFF, the Custom Action function is disabled and only the initial right click, left click and wheel scroll functions may be used.
  • Page 34 1) Connect the rechargeable USB Type-C connector of the included charging cable to the USB Type-C port of this product. 2) Connect the USB-A connector on the included charging cable to the USB-A port on your PC or a portable USB charger.

  • Page 35: Pairing With An Android Device

    It will take approximately x hours until full charge. If the LED light does not stop blinking even after the prescribed charging time, remove the charging USB cable and stop charging for the moment. Otherwise, this can cause overheating, rupturing or fires. Turn the power ON 1) Slide the power switch on the underside of the product to the ON position.
  • Page 36 5) Hold down the CONNECT button on the underside for 3 seconds and then release. Pairing mode will be activated and the status light will blink blue. CONNECT button 6) Tap on "ELECOM OpticalMouse" when it is detected under "Available devices".
  • Page 37 *Screen shots will be replaced with English versions. 7) Tap on “Pair”. Pairing begins. 8) Pairing is complete when this product is added to “Other devices”. You can now use the mouse. Chrome OS Using Bluetooth connection...
  • Page 38 Charge the battery 1) Connect the rechargeable USB Type-C connector of the included charging cable to the USB Type-C port of this product. 2) Connect the USB-A connector on the included charging cable to the USB-A port on your PC or a portable USB charger.
  • Page 39 It will take approximately x hours until full charge. If the LED light does not stop blinking even after the prescribed charging time, remove the charging USB cable and stop charging for the moment. Otherwise, this can cause overheating, rupturing or fires. Turn the power ON 1) Slide the power switch on the underside of the product to the ON position.
  • Page 40 *Screen shots will be replaced with English versions. 3) Using the CONNECT button, select the device ( ) you want to connect to. The LED light and the status light will light up blue for 3 seconds. Please refer to “Switch connected device” to switch between connected devices. The selected connected Bluetooth device will be registered under your paired devices.
  • Page 41 *Screen shots will be replaced with English versions. CONNECT button 6) Click on “ELECOM OpticalMouse”. Pairing begins. 7) "ELECOM OpticalMouse connected" will be displayed at the bottom of the screen.
  • Page 42 *Screen shots will be replaced with English versions. Click “Bluetooth” like in step 2. Pairing is complete when “ELECOM OpticalMouse” appears under “Currently connected”. You can now use the mouse. Using wireless connection Charge the battery 1) Connect the rechargeable USB Type-C connector of the included charging cable to the USB Type-C port of...
  • Page 43 2) Connect the USB-A connector on the included charging cable to the USB-A port on your PC or a portable USB charger. Connecting to a PC port Connecting to a portable USB charger port Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector.
  • Page 44 The LED light will light up for a period of time. * When the battery level is running low, the LED light will blink for a period of time. Power-saving mode When the mouse is left untouched for a fixed period of time while the power is ON, it automatically shifts to power-saving mode.
  • Page 45 *Screen shots will be replaced with English versions. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector. When removing the receiver unit This product supports hot plugging.

  • Page 46: Specifications

    To use the function assignment function and presentation mode with this product, the ELECOM Mouse Assistant must be installed. “ELECOM Mouse Assistant” is a software that allows you to use the mouse more effectively. Using ELECOM Mouse Assistant, users can set the functions they want to the unique buttons and use them to perform the operations they want.
  • Page 47 *XXX will be fixed later. Radio wave range Maximum distance approximately 10 m *May vary depending on the environment. Sensor Resolution 2000/1000 DPI Sensor type Ultimate BlueLED Buttons 8 * including wheel button Number of wheels Receiver unit storage compartment Supported Power Supply (Mouse) Built-in lithium-ion battery (rechargeable) Battery life Maximum approximately 1 month...
  • Page 48 Model/모델명: M-XGXL50MBS, E01A China / 中国 设备型号 M-XGM50BBS CMIIT ID: XXXXXXXXXX 设备型号 M-XGL50BBS CMIIT ID: XXXXXXXXXX RoHS Compliance (产品中有毒有害物质或元素的名称及含量) https://www.elecom.co.jp/global/certification/pdf/RoHS_China.pdf CE Declaration of Conformity https://www.elecom.co.jp/global/certification/pdf/CE_DoC.pdf RoHS Compliance https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf CE Authorised representative: Amazon Services Europe S.à r.l 38 avenue John F. Kennedy, L-1855 Luxembourg WEEE Disposal and Recycling Information This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste.WEEE...
  • Page 49 Singapore ▼ Operating Frequencies: XXXX-XXXX MHz Maximum field intensity / RF Output power: X.XX mW Taiwan / 台灣 BSMI RoHS Compliance (限⽤物質含有情況標⽰聲明書) https://www.elecom.co.jp/global/certification/pdf/RoHS_Taiwan.pdf ■■■■■■■■■■■■■■ Singapore 型號 M-XGXL50MBS: CCAH23LP5370T1 型號 M-XGM50MBS: CCAH23LP5371T0 型號 E01A: CCAH23LP5360T8 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使⽤者均不得擅⾃變更頻率、加⼤功率或變更原設計之特性及功能。 低功率射 頻器材之使⽤不得影響⾶航安全及⼲擾合法通信；經發現有⼲擾現象時，應立即停⽤，並改善⾄無⼲擾時⽅得繼續使⽤。 前述合法通信， 指依電信管理法規定作業之無線電通信。 低功率射頻器材須忍受合法通信或⼯業、科學及醫療⽤電波輻射性電機設備之⼲擾。...
  • Page 50 The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Responsible party ELECOM USA, Inc. 4041 MacArthur Blvd Suite 400, Newport Beach, CA 92660 USA elecomusa.com...

This manual is also suitable for:

M-xgm50mbs seriesM-xgl50mbs series

Table of Contents