Table of Contents
Advertisement
Quick Links
SFA Companies
Tel: 888-332-6419
Model No. M2706
E-mail: sales@bvahydraulics.com
Maximum Operating Pressure 10,000 PSI
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Aluminum Double Acting
Cylinder Instruction Manual
MODEL: HUD7506T
75 Ton Capacity
10939 N. Pomona Ave. Kansas City, MO 64153
*
Fax: 816-448-2142
Website: www.bvahydraulics.com
HUD7506T-M0_102019
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BVA Hydraulics HUD7506T
Summary of Contents for BVA Hydraulics HUD7506T
- Page 1 HUD7506T-M0_102019 Aluminum Double Acting Cylinder Instruction Manual MODEL: HUD7506T 75 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 Model No. M2706 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Maximum Operating Pressure 10,000 PSI This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
-
Page 2: Safety And General Information
BVA Hydraulics authorized service center. Owners 2. Verify that the product and the application are compatible. If in and operators of this equipment shall be aware that the use and doubt, call BVA Hydraulics Technical Service (888) 332-6419. -
Page 3: Installation
WARNING Failure to comply with the following warnings may Do not pull, position or move cylinder setup by the result in personal injury as well as property hose. Use carrying handle or other means of safe damage. transport. Do not handle pressurized hoses. Never attempt to •... -
Page 4: Specifications
1. Inspect hoses and connections daily. Replace damaged other harmful elements. When a cylinder has not been used for components immediately with BVA Hydraulics Replacement a period of 4 months, it should be connected to a pump and fully Parts only. -
Page 5: Troubleshooting Guide
MAINTENANCE (cont.) NOTICE: Do not attempt to grasp with pliers or wrench without first wrapping the jaws of such tool with rags or similar padding. How to bleed air from system: 1. Place pump at a higher elevation than the hose and cylinder as shown in Figure 2. - Page 6 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
-
Page 7: Limited Lifetime Warranty
This warranty does not cover ordinary wear and tear, overloading, alterations (including repairs or attempted repairs not performed by BVA Hydraulics or one of its authorized personnel), improper fluid use, or use of the product in any manner for which the product was not intended or the use of which is not in accordance with the instructions or warnings provided with the product. - Page 8 NOTES: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
Need help?
Do you have a question about the HUD7506T and is the answer not in the manual?
Questions and answers