Page 1
Manuale di installazione Manuale di installazione Installation manual uso e manutenzione uso e manutenzione Damper Modular T Smart ATB Modular T Smart ATB Compact L D-EIMOC003007-24_00EN › Compact L Modular T Smart ABT Modular T Smart ABT Original instructions DATE October 2024 Traduzione delle istruzioni originali Traduzione delle istruzioni originali...
Important warnings The pictogram shows a situation of immediate danger or a dangerous situation that might cause injuries or death. The pictogram shows that it is necessary to adopt suitable behaviour in order to avoid jeopardising staff safety and cause damages to the equipment. The pictogram shows particularly important technical information that should be taken into consideration by the people installing or using the equipment.
Installation Left handling VERSION MACHINES ALB**L** DAMPER DAMPER DAMPER DAMPER Right Handling air ducts (not supplied) VERSION MACHINES ALB**R** DAMPER DAMPER DUCT Return air Exhaust air Supply air Fresh air Unit duct, example...
Page 5
Size 150 mm 250 mm 200 mm 400 mm 04-05 300 mm 500 mm 06-07 400 mm 700 mm SUPPLIED x 8 pieces Damper must be mounted as shown: Pivot in upper side Installation of gasket...
Page 6
Compact L Compact L Plate must be 02-05 M5 02-05 M5 06-07 M6 mounted by hole 06-07 M6 of damper in bottomside Junction between Compact L and damper Junction between duct and damper Installation of damper...
Page 7
Connection of Dampers AUE00ASDA spring return actuator ATE00AMDA modulating actuator Close the throttle valve Set the pointer to the “0” position. The actuator assembly instructions are contained in the DUCT actuator packaging Return air Exhaust air Supply air Fresh air Installation of actuator...
Page 8
provided EXPANSION MODULE POL955 Cable not supplied Connect according to the wiring diagram Right Handling VERSION MACHINES ALB**R** Connection of Dampers...
Page 9
provided EXPANSION MODULE POL955 Cable not supplied Connect according to the wiring diagram Left handling VERSION MACHINES ALB**L** Connection of external Dampers...
Testing procedure | ON/OFF damper. Set the pointer to the “1” position Switch on the machine WARNING! Internal parts of the Check if the flap moves until full open machine under voltage position. If not, check the actuator’s wiring connection Testing procedure...
Page 11
Software setup Commissioning module ALC00895A is required. Compact L psw:2526...
Page 12
La presente pubblicazione è redatta solo come supporto tecnico e non costituisce impegno vincolante per Daikin Applied Europe S.p.A. Daikin Applied Europe S.p.A. ne ha compilato il contenuto al meglio delle proprie conoscenze. Nessuna esplicita o implicita garanzia è data per la completezza, precisione, affidabilità...
This manual is also suitable for:
Compact l ala03edaCompact l ala05edaCompact l ala07eda
Need help?
Do you have a question about the Compact L ALA02EDA and is the answer not in the manual?
Questions and answers