Advertisement
Quick Links
SAFETY GUIDELINES — READ BEFORE USE
WARNING: Important: Read and understand these instructions before installing or using the
Overbed Table. If you do not understand any part of these instructions, contact a healthcare
professional for direction in the use of this product. If the overbed table is not properly assembled
and adjusted, personal injury and/or damage to the overbed table could result.
WARNING: If components are damaged or missing, contact your GF Health Products, Inc.
authorized distributor immediately. DO NOT use substitute parts. Non-Intensa replacement
parts could cause personal injury and damage to the Overbed Table.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury
caused by improper assembly or service of this product.
UNPACKING
1. Open the box and inspect for any
damaged or missing components.
If damage is evident, DO NOT USE.
Contact carrier / distributor for
further instruction.
2. During assembly, refer to pictures
that follow to identify components.
A919000I: OVERBED TABLE,
ASSEMBLY & OPERATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE USE
release
lever
locking casters
A919xxx Overbed Table
table top
column
base
non-locking
(swivel) casters
IN_A9190I-INS-LAB-RevA23
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Graham Field intensa A919000I
Summary of Contents for Graham Field intensa A919000I
- Page 1 A919000I: OVERBED TABLE, ASSEMBLY & OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE USE SAFETY GUIDELINES — READ BEFORE USE WARNING: Important: Read and understand these instructions before installing or using the Overbed Table. If you do not understand any part of these instructions, contact a healthcare professional for direction in the use of this product.
- Page 2 ASSEMBLY INSTRUCTIONS Tools required: hex wrench or M17 open-end wrench, or M5 hex key Assembly (see pictures below) WARNING: The table is shipped with a column retainer screw, shown below in step 2, to prevent the column from changing height. DO NOT remove the column retainer screw fully from the column until step 8 below is complete;...
-
Page 3: Maintenance
WARNING: Ensure the table is assembled as described, and that all components are securely attached before use. OPERATION INSTRUCTIONS WARNING: Do not lean on the suspended end of the table top; this may cause the table to tip. WARNING: The table supports up to 100 lb (45 kg) of dispersed weight, EVENLY DISTRIBUTED. -
Page 4: Limited Warranty
LIMITED WARRANTY SCOPE OF WARRANTY GF Health Products, Inc. (“GF”) warrants to the original purchaser only that it will replace or repair components, at GF’s sole discretion, that are defective in material or workmanship under normal use and service. All warranties are conditioned upon the proper use of the products strictly in accordance with good commercial practice and applicable GF instructions and manuals, including proper use and maintenance. - Page 5 Manufactured By: Intensa, Inc. | 180 1 S. Elm Street High Point, NC 27260 | USA Top made in the USA Base made in Taiwan +1 770.368.4700 Intensa, Inc. is a wholly owned subsidiary of GF Health Products, Inc. Information contained herein is subject to change without notice. ©...
Need help?
Do you have a question about the intensa A919000I and is the answer not in the manual?
Questions and answers