Safety Warnings; Set Contents - Marmitek GIGAVIEW 820 User Manual

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a
bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright
light sources.
• In case of improper usage or if you have altered and repaired the product yourself, all
guarantees expire. Marmitek does not accept responsibility in the case of improper usage
of the product or when the product is used for purposes other than specified. Marmitek
does not accept responsibility for additional damage other than covered by the legal
product responsibility.
• This product is not a toy. Keep out of reach of children.
• Do not open the product (battery panel excepted): the device may contain live parts. The
product should only be repaired or serviced by a qualified expert.
• Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never
use old and new batteries or different types of batteries together. Remove the batteries
when you are not using the system for a longer period of time. Check the polarity (+/-) of
the batteries when inserting them in the product. Wrong positioning can cause an explo-
sion.
• Only connect the adapter to the mains after checking whether the mains voltage is the
same as the values on the identification tags. Never connect an adapter or power cord
when it is damaged. In that case, contact your supplier.
1. INTRODUCTION
Congratulations on purchasing a Marmitek GigaView820! This allows you to connect a maxi-
mum of 2 HD devices and send the HD signal wirelessly to your HDTV or HD projector.
Examples of HD devices include: HD DVD players, Blu-ray players, HD set-top boxes,
PlayStation3, Xbox 360, etc. The GigaView820 supports Full HD resolutions up to 1080p. The
inbuilt loop-through function (HDMI out) on the transmitter means that you can watch the
same content on the 1st as on the 2nd HDTV or the HD projector (via the receiver). The
inbuilt infrared extender function allows you to operate HD equipment using your own
remote control even if it is kept in a closed cabinet!
Marmitek products are manufactured with the utmost precision and are of top quality. Please
read this manual carefully and follow the instructions in order to get the very best from this
product.

2. SET CONTENTS

1x GigaView820 Transmitter
1x GigaView820 Receiver
1x GigaView820 Remote Control
1x Gold plated HDMI cable
1x IR Sensor Extender cable
GIGAVIEW820™
1x IR LED Extender cable
2x Energy-saving switch mode Power Supply
2x Plugs + screws
1x Manual
3