Tarter HDCHPAS Assembly Instructions

ASSEMBLY INSTRUCTIONS
CATTLEMASTER SWEEP SYSTEM LEAD-UP KIT
Tarter's CattleMaster Sweep System Lead-Up Kit is a modular set of heavy-gauge steel panels and bows that you can assemble in a variety of configurations to fit
your cattle-handling needs. You can create a 30-foot lead-up alley that connects to your sweep system or assemble custom-built confinement and working areas. The
components work with left- and right-hand sweep tub setups, so there is no need to change your existing configuration. Enhance your kit's versatility by adding an
Alley Panel with Cut Gate (APWCGR/SAPWCGR), a 10' Steelmax Panel with Walk-Thru (RRW64), or 10' Tarter corral panels. Longer corral panels may work in certain
configurations.
These instructions guide users on the initial setup of a lead-up alley that connects to a Tarter sweep system.
Assembly steps may vary based on the desired configuration.
KIT INCLUDES:
HDCHPR610 ( 6)
x
CattleMaster Panel
Additional individual kit pieces available for purchase if needed.
TOOLS NEEDED:
Tie cutters
Pliers
COMPONENT FEATURES:
WELDED CHAIN
LATCH
FEMALE
CONNECTION
POINT
DUAL SET
FEMALE/MALE
CONNECTION
POINT
HDCHBOR10 ( 2) HDCHWR10 (
x
CattleMaster Bow w/Gate
CattleMaster Bow Only
TIPS:
– Assemble kit on level ground.
– Watch for possible pinch points.
– Wear appropriate personal protective equipment (e.g., gloves, closed-toe work shoes, no loose-fitting garments).
– Practice safe lifting techniques if moving panels and bows by hand.
– Minimize injury risks by requiring two or more persons for assembly.
– When securing CattleMaster Panels, ensure the chain is as tight as possible to minimize panel movement and noise. You can
eliminate slack while wrapping chain by having someone lift opposite end of the panel. Secure chain to the welded chain
latch, then make sure bottom of panel still rests on the ground.
CATTLEMASTER PANEL
CATTLEMASTER BOW W/GATE
Note: CattleMaster Bow also has dual
connection points on each side.
(HDCHPAS)
1) UHUB (
x
Universal Hookup Bar
WELDED CHAIN
(HDCHPR610)
LATCH
(HDCHWR10)
DUAL SET
MALE/FEMALE
CONNECTION
See
Detail A
POINT
DETAIL A: ADJUSTABLE
GATE LATCH PLUNGER
TARTERUSA.COM | 1.800.RED.GATE
1)
x
MALE
CONNECTION
POINT
CONNECTION
POINTS ALIGN
WITH SECONDARY
ARCH ASSEMBLY
UNIVERSAL HOOK-UP
BAR (UHUB)
ATTACHMENT
ROD (AR)