Tarter CattleMaster 12 Series Usage Instructions

Tarter CattleMaster 12 Series Usage Instructions

Hydraulic chute

Advertisement

Quick Links

Hydraulic Chute
USAGE INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CattleMaster 12 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Tarter CattleMaster 12 Series

  • Page 1 Hydraulic Chute USAGE INSTRUCTIONS...
  • Page 2 Hydraulic Chute USAGE INSTRUCTIONS 1. Before Using Chute 2. Pre-Operation Check • Place CattleMaster ® hydraulic chute on level area. • Locate 110 volt electric cord on top of chute and plug into an outdoor, • Grease all zerk fittings on chute. grounded, heavy-duty (10 or 12 •...
  • Page 3 Hydraulic Chute USAGE INSTRUCTIONS 4. Adjusting Hydraulic Pressure A. Locate the set screw situated D. Using a standard flat-blade to the left of the Hydraulic screwdriver, rotate the adjustment Control Valve leavers. screw clockwise to increase pressure and counterclockwise to decrease B.
  • Page 4 Hydraulic Chute USAGE INSTRUCTIONS 6. Care and Maintenance There are 7 zerk grease fittings on the chute. These should be periodically checked and greased. A. Each of the 3 hydraulic arms on top of the chute have a zerk fitting. See photos of chute on right for locations of fittings.
  • Page 5 Hydraulic Chute USAGE INSTRUCTIONS 7. Operation (Release) G. Release pressure I. For oversized animals or on squeeze panel for sorting, animals can be when finished with released from the control animal. side of chute. To release animal, rotate locking mechanism on escape side and pull down on escape handle located on the control side.
  • Page 6 Hydraulic Chute USAGE INSTRUCTIONS 9. Access Features A. Open individual side doors to access any part of the animal by releasing access lock on the top of desired door. Note: To remove door – while opened, lift door up and out from chute frame.

Table of Contents