Zero Appliances ECF500IC Installation, Service And User Instructions Manual

Glass lid freezer

Advertisement

Quick Links

Installation, Service and User
INSTRUCTIONS
FOR THE
ZERO MODELS:
ECF500IC
GLASS LID FREEZER
230V Electric
ZERO APPLIANCES (PTY) LTD
Read before using the product

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ECF500IC and is the answer not in the manual?

Questions and answers

Summary of Contents for Zero Appliances ECF500IC

  • Page 1 Installation, Service and User INSTRUCTIONS FOR THE ZERO MODELS: ECF500IC GLASS LID FREEZER 230V Electric ZERO APPLIANCES (PTY) LTD Read before using the product...
  • Page 2: Before Using Your Freezer

    Before Using Your Freezer • Remove the exterior and interior packing. • Before connecting the freezer to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
  • Page 3: Operating Your Freezer

    OPERATING YOUR FREEZER Temperature Control • Your freezer has one control for regulating the temperature. The temperature control is located on the lower right-hand corner. • The range of the temperature control is from -18°C to -23°C. TO START OPERATION Connect to a dedicated plug socket and switch the plug on.
  • Page 4: Helpful Hint

    CAUTION Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling coils and will void the warranty. • Remove the frozen goods from the freezer and place it in a cooler to protect the food. •...
  • Page 5: Problems With Your Freezer

    Vacation Time • Remove all the food. • Unplug the freezer. • Clean the freezer. • Leave the lids open slightly to avoid possible formation of condensation, mold, or odors. • Use extreme caution in the case of children. The unit should not be accessible to child’s play.
  • Page 6 The freezer does not have the correct clearances. The freezer has recently been disconnected for a period of time. Three to four hours are required for the freezer to cool down completely. Temperature inside the freezer is too warm. Temperature control is set too warm. Turn the control to a cooler setting and allow several hours for the temperature to stabilize.
  • Page 7 Made in South Africa (Pty) Ltd...

Table of Contents