Download Print this page

Zero Appliances ECF220AC Instructions Manual

Single lid chest freezer

Advertisement

Quick Links

Installation, Service and User
INSTRUCTIONS
FOR THE
ZERO MODELS:
ECF220AC
SINGLE LID CHEST FREEZER
230V Electric
ZERO APPLIANCES (PTY) LTD

Advertisement

loading

Summary of Contents for Zero Appliances ECF220AC

  • Page 1 Installation, Service and User INSTRUCTIONS FOR THE ZERO MODELS: ECF220AC SINGLE LID CHEST FREEZER 230V Electric ZERO APPLIANCES (PTY) LTD...
  • Page 2: Before Using Your Freezer

    Before Using Your Freezer • Remove the exterior and interior packing. • Before connecting the freezer to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
  • Page 3: Operating Your Freezer

    OPERATING YOUR FREEZER Temperature Control • Your freezer has one control for regulating the temperature. The temperature control is located on the lower right-hand corner. • The range of the temperature control is from +1°C to -18°C”. TO START OPERATION Connect to a dedicated plug socket and switch the plug on.
  • Page 4: Helpful Hint

    CAUTION Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling coils and will void the warranty. • Remove the frozen food from the freezer and place it in a cooler to protect the food. •...
  • Page 5: Vacation Time

    odor free and running efficiently. Vacation Time • Remove all the food. • Unplug the freezer. • Clean the freezer. • Leave the door open slightly to avoid possible formation of condensation, mold, or odors. • Use extreme caution in the case of children. The unit should not be accessible to child’s play.
  • Page 6 Compressor turns on and off frequently. The room temperature is hotter than normal. A large amount of food has been added to the freezer. The door is opened too often. The door is not closed completely. The temperature control is not set correctly. The door gasket does not seal properly.
  • Page 7 Open the door less often. The door is not sealed properly. Moisture forms on outside of freezer. Door is slightly open, causing cold air from inside the freezer to meet warm moist air from outside. The freezer is not level. The door will not close properly.