Page 1
200 Series Wall Mount Pivot User's Guide Guía del usuario Manuel de l’utilisateur Benutzerhandbuch Gebruikersgids Guida per l’utente ユーザーガイド 用户指南 사용자 안내서 3/32" 8-32 x 1/4" M4 x 10mm M8 x 80mm 10-24 x 5/8" 1/8" M4 x 10mm Stud Finder 1/2"...
Page 2
Set Your Workstation to Work For YOU! Confi gure su estación de trabajo para que trabaje para USTED. Ajustez votre station de travail en fonction de VOS besoins ! Richten Sie Ihren Arbeitsplatz so ein, dass er für SIE arbeitet! Stel uw werkstation zo in dat het voor U werkt! Approntare la stazione di lavoro nella posizione ergonomica ottimale.
Page 3
1.125" (28.6mm) 25 lbs (11.3 kg) 6" (152mm) 4.1" (104mm) 5.8" (148 mm) 1.65" 4.20" (106 mm) (42 mm) 1.28" (32 mm) 5.21" (132.4 mm) 3.93" (100 mm) WARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, unsafe condition which could lead to personal injury and/or property damage.
Page 4
Ergotron product. NOTE: Wall Track and Brackets sold separately. Producto Ergotron. Guía y soporte de pared Vendido por separado Produit Ergotron. Montant mural et fi xation Vendu séparément 1/8" Ergotron Produkt. Alu-Profi lschiene und Bügel Separat erhältlich Ergotron-product. Muurrail en -beugel Apart leverbaar Prodotto Ergotron.
Page 5
Concrete Concreto Béton Massivbeton Beton Cemento コンクリート 水泥质 콘크리트 3-1/8" (80 mm) Ø 3/8" (10 mm) WARNING: WARNING: Mounting holes must be at least 3-1/8” (80mm) deep and must be located within solid con- Anchors that are not fully set in solid concrete will not support the applied load resulting crete, not mortar or covering material.
Page 6
Wood Madera Bois Solide Holzbalkenträger Massief Houten Pilaren Due montanti in legno massiccio 木 木质 나무 Ø 3/16" (5 mm) M8 x 80mm 1/2" (13mm) CAUTION: Make sure the wall mount bracket is level, fl ush and snug to the wall surface. DO NOT OVERTIGHTEN THE BOLTS.
Page 7
75 x 75mm M4 x 10mm M4 x 10mm 100 x 100mm 8-32 x 1/4" 3/32" M4 x 10mm M4 x 10mm 888-45-160-W-00 rev.A • 12/08 7 / 10...
Page 8
It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
Page 9
Follow these instructions to tighten or loosen tension. 1/2" Siga estas instrucciones para ajustar o afl ojar la tensión. (13mm) Pan – Side-to-side Suivez ces instructions pour desserrer ou resserrer la tension. Giro (derecha e izquierda) Befolgen Sie diese Anleitung, um die Spannung zu lockern oder zu verstärken. Orientation : Droite et Gauche Volg deze instructies om de spanning te vergroten of verkleinen.
Need help?
Do you have a question about the 200 Series and is the answer not in the manual?
Questions and answers