Page 2
FLUOROMETER Principal uses for TRASAR 2 Pen fluorometer OVERVIEW include: Function Key • Cooling Towers Overview • Reverse Osmosis BATTERY • Process Applications COMPARTMENT ® • Waste Water MEAS Please call the Equipment Help Desk at 630 305 CHEM °C to reactivate or for technical support.
INITIAL SET UP • Press READ/ENT which will save the current value and increment PROCEDURE to the next digit Setting PF (Product factor) ® and % TRA Value (Background fluorescence SELECT value) READ/ ENTER STEP 1: Press 'SELECT' STEP 4: •...
CALIBRATION STEPS STEP 5: Press 'CAL' button – (Initiates a 2- STEP 1: Point calibration). ® Ensure you have Distilled water (DI water), TRASAR 2 Calibration SELECT Solution (Part#: 460-S0920.75), TRASAR 2 Pen fluorometer, plugs, syringe and filter READ/ ENTER before starting the calibration steps STEP 6:...
Page 5
STEP 9: STEP 13: Screen will blink “MEAS” several Press the 'READ/ENT' button within times (for about 7 seconds) and then less than 60 seconds. will read “Add Std”. MEAS seconds STEP 14: Screen will blink “MEAS” several STEP 10: times (for about 7 seconds).
MEASUREMENT STEPS to your syringe, before filling the sample cell. Due to compatibility NOTE: If your sample turbidity reasons, it is critical that you use range is greater than 20 NTU, only the filter sent in this package) please dilute or use a filter. The STEP 5: pen fluorometer does not check for turbidity.
Page 7
REACTIVATION Step 3: PROCEDURE Press 'SELECT' within 30 seconds (Unit will display To prevent competitors from using the reactivation the pen fluorometer to control their 30 seconds number. Write programs, a deactivation algorithm down the has been programmed into the reactivation device.
Step 6: DIAGNOSTICS & TROUBLESHOOTING Enter the 4-digit password (Enter the Self-Diagnostic Messages numbers and Low battery indicator letters in the same manner as you The Battery indicator will indicate would enter the different levels of battery life. Use product factor.) fresh silver oxide batteries for replacement.
TECHNICAL SPECIFICATIONS: Measurement TRASAR Product Measuring Range 0-9999 ppm Resolution 0.1 ppm product Relative accuracy ±5 % of reading Calibration Two-point calibration – DI Water and calibration solution Temperature Measurement Range 5.0 to 50.0 °C (41.0 to 122.0 °F) Resolution 0.1 °C Temperature Compensation Automatic Temperature...
GENERAL INFORMATION • 12-month coverage of all standard part-numbered Nalco Packaging / Scope of delivery equipment offerings (excepting consumable items and products The instrument is packaged in a with shelf lives of less than 12 plastic box with an instruction months.) manual.
Page 12
Tracer Technology. • Avoid exposure to extreme temperatures, excessive moisture, Nalco an Ecolab Company sand, or mechanical shock. Attn: Legal Department 1601 W. Diehl Road Naperville, IL 605 63...
Need help?
Do you have a question about the NALCO TRASAR 2 and is the answer not in the manual?
Questions and answers