Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for UNI-T UT3510+ Series
Summary of Contents for UNI-T UT3510+ Series
- Page 1 Quick Start Guide UT3510+ Series Bench Top Micro Ohm Meter V1.0 2024/08...
-
Page 3: Copyright Information
Information in this manual supersedes all previously published versions. UNI-T is the registered trademark of Uni-Trend Technology (China) Co., Ltd. UNI-T warrants that the product will be free from defects for three years period. If the... - Page 4 UNI-T distributor. Probes, other accessories, and fuses are not included in this warranty. If the product is proved to be defective within the warranty period, UNI-T reserves the rights to either repair the defective product without charging of parts and labor, or exchange the defected product to a working equivalent product.
- Page 5 This warranty is written by UNI-T for this product, and it is used to substitute any other express or implied warranties. UNI-T and its distributors do not offer any implied warranties for merchant ability or applicability purposes.
-
Page 6: Chapter 1 Panel
The product has a simple, intuitive and easy to use front panel, as shown in the following figure. For more details, please refer to UT3510+ Series Bench Top Ohm Meter User Manual. 1.2 Rear Panel For more details, please refer to UT3510+ Series Bench Top Ohm Meter User Manual. -
Page 7: Chapter 2 User's Guide
UT3510+ Series Bench Top Micro Ohm Meter Chapter 2 User’s Guide This manual includes safety requirements and the operation of UT3510+ series Benchtop Ohm Meter, including UT3513+ and UT3516+. 2.1 Inspecting Packaging and List When you receive the instrument, please make sure to check the... -
Page 8: Safety Statements
UT3510+ Series Bench Top Micro Ohm Meter professional users and responsible organizations for measurement purposes. Do not use this device in any way not specified by the manufacturer. This device is only for indoor use unless otherwise specified in the product manual. - Page 9 UT3510+ Series Bench Top Micro Ohm Meter It indicates possible danger, which may cause damage to this device or other equipment if you fail to follow a certain procedure or condition. If the Caution “Caution” sign is present, all conditions must be met before you proceed to operation.
- Page 10 UT3510+ Series Bench Top Micro Ohm Meter measures, and any high-voltage and low-voltage circuits, such as the copier in the office. CATII: Primary electrical circuit of the electrical equipment connected to the indoor socket via the power cord, such as mobile tools, home appliances, etc.
- Page 11 UT3510+ Series Bench Top Micro Ohm Meter This product complies with marking requirements of WEEE Directive (2002/96/EC). This additional label indicates that this electrical / Waste electronic product must not be discarded in household waste. This environment-friendly use period (EFUP) mark...
- Page 12 UT3510+ Series Bench Top Micro Ohm Meter You can only use the special power cord for the instrument approved by the local and state standards. Please check Use the power whether the insulation layer of the cord is damaged or the cord cord properly is exposed, and test whether the cord is conductive.
- Page 13 UT3510+ Series Bench Top Micro Ohm Meter Please use the input / output ports provided by this device in a properly manner. Do not load any input signal at the output port Use the input / of this device. Do not load any signal that does not reach the output port of rated value at the input port of this device.
- Page 14 UT3510+ Series Bench Top Micro Ohm Meter Caution If this device may be faulty, please contact the authorized maintenance personnel of UNI-T for testing. Any maintenance, Abnormality adjustment or parts replacement must be done by the relevant personnel of UNI-T.
-
Page 15: Environmental Requirements
UT3510+ Series Bench Top Micro Ohm Meter 2.3 Environmental Requirements This instrument is suitable for the following environment: Operating Environment Requirements 0℃ ~40℃ Operating temperature 20%~80% Operating humidity (non-condensation) -10℃ ~70℃ Storage temperature Altitude ≤2000 meters Pollution degree To prevent excessive dust, users could clean the instrument housing regularly. The housing is not waterproof, please disconnect the power supply first and then wipe the housing with a dry cloth or a slightly moistened soft cloth. -
Page 16: Electrostatic Protection
2.7 Remote Control UT3510+ Series Bench Top Ohm Meter supports communication with the computer via RS232/RS485/LAN interface. Users can use programming language SCPI or Modbus via RS232/RS485/LAN interface to remote control the instrument. -
Page 17: Chapter 3 Quick Start
UT3510+ Series Bench Top Micro Ohm Meter Chapter 3 Quick Start 3.1 Zero Setting 3.1.1 Connect the test line to the instrument. Align test line head and insert into instrument test port. The connection mode is as follows: When inserting the test line, be sure to match the black test line ▲ end with the black SENSE hole on the front panel of the instrument, and be sure to match the red test line ▲... - Page 18 UT3510+ Series Bench Top Micro Ohm Meter 3.1.2 Short-circuit the test clip Short-circuit the test clip as shown below; 3.1.3 0 ADJ ON Press Setup, use the arrow keys to move the cursor over [0 ADJ] and set 0 ADJ to ON 3.1.4 Zero Setting...
-
Page 19: Resistance Test
UT3510+ Series Bench Top Micro Ohm Meter 3.2 Resistance Test Clamping both ends of the resistor with a Kelvin test clip, then we can test the resistance of the resistor. -
Page 20: Chapter 4 Troubleshooting
UT3510+ Series Bench Top Micro Ohm Meter Chapter 4 Troubleshooting Possible faults in use of UT3510+ series and troubleshooting methods are listed below. Please handle fault as the corresponding steps. If it cannot be handled, please contact with the distributor or local office and provide the model information (press Setup Config... -
Page 21: Chapter 5 Appendix
UNI-T (UNI-TREND TECHNOLOGY (CHINA) CO., LTD.) ensures the production and sale of products, from authorized dealer’s delivery date of three years, without any defects in materials and workmanship. If the product is proven to be defective within this period, UNI-T will repair or replace the product in... - Page 22 UT3510+ Series Bench Top Micro Ohm Meter accordance with the detailed provisions of the warranty. To arrange for repair or acquire warranty form, please contact the nearest UNI-T sales and repair department. In addition to permit provided by this summary or other applicable insurance...
- Page 23 UT3510+ Series Bench Top Micro Ohm Meter Scan to Download relevant document, software, firmware and more. No.6, Industrial North 1st Road, Songshan Lake Park, Dongguan City, Guangdong Province, China...
Need help?
Do you have a question about the UT3510+ Series and is the answer not in the manual?
Questions and answers