Salience Vi-Plus Srpu-Lsq1Srpd0 - 3Com H3C S7503E-S CHASSIS Installation Manual

Table 1-84 Description of the LPU status LEDs
LED
RUN
ALM
If the RUN LED flashes at a high frequency, the card is in the startup process, but is not yet operational.
At system startup, the ALM LED will be ON for a while, but it does not mean that the card is faulty.
ACTIVE LED
The ACTIVE LED shows the active/standby status of the LSQ1MPUB0. If the ACTIVE LED is ON, the
LSQ1MPUB0 is active; if OFF, the LSQ1MPUB0 is standby.
RESET button
A reset button is provided on the LSQ1MPUB0 for you to reset the card when necessary.

Salience VI-Plus SRPU-LSQ1SRPD0

Applicable models
S7503E
S7506E
S7510E
S7506E-V
Technial specifications
Table 1-85 Technical specifications of the LSQ1SRPD0
Item
CPU
Boot ROM
Flash memory
DDR SDRAM
Dimensions (H × W × D)
Interfaces
Power consumption
ON/OFF: The LPU is faulty or out of position.
Blinking: The LPU is operating normally.
OFF: The LPU is operational or out of position.
ON: The LPU is faulty.
MIPS64, 600 MHz
512 KB
64 MB
512 MB
45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.)
One CF card slot
One console port, used for local or remote configuration and
management of the switch through a dialup connection
One 10/100Base-TX management port
50 W to 60 W
1-49
Description
Specifications