Salience Vi-10Ge Srpu-Lsq1Srp2Xb0 - 3Com H3C S7503E-S CHASSIS Installation Manual

Fan status LEDs
FAN: The LEDs shows the status of the fan tray.
Table 1-43 Description of the fan status LEDs
LED
OK
FAIL
LPU status LEDs (SLOT0, SLOT1, and SLOT2)
SLOT0, SLOT1, and SLOT2: The LPU status LEDs indicate the status of the LPUs seated in these
three slots.
Table 1-44 Description of LPU status LEDs
LED
RUN
ALM
If the RUN LED flashes at a high frequency, the card is in the startup process, but is not operational yet.
At system startup, the ALM LED will be ON for a while, but it does not mean that the card is faulty.
RESET button
A reset button is provided on the LSQ1CGV24PSC0 for you to reset the card when necessary.

Salience VI-10GE SRPU-LSQ1SRP2XB0

Applicable models
S7503E
S7506E
S7510E
S7506E-V
Technical specifications
Table 1-45 Technical specifications of the LSQ1SRP2XB0
Item
CPU
Boot ROM
ON: The fans operate normally.
OFF: The fans are faulty or out of position.
ON: The fans are faulty or out of position.
OFF: The fans operate normally.
ON/OFF: The LPU is faulty or out of position.
Blinking: The LPU is operating normally.
OFF: The LPU is operational or out of position.
ON: The LPU is faulty.
MIPS64, 600 MHz
512 KB
Description
Description
Specifications
1-33