Osram WPL Wiring And Installation Manual

Installation Notes
The WPL is to be installed in dry, indoor locations ONLY. It is NOT rated for
damp installations. Damp locations are defined as: interior locations subject
to moderate degrees of moisture, such as basements, barns, cold-storage
warehouses, as well as partially protected locations under canopies, marquees
and open roofed porches.
Troubleshooting
There are no user-serviceable parts inside the WPL. Please return the
device to OSRAM if service is required.
Regulatory Approvals
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment under FCC rules.
This equipment has been tested and found to comply with Industry Canada
ICES-003 Issue 5 (CAN ICES-3 (A)/NMB-3(A)).
Contains FCC ID: H79DFZM-E7210
Contains IC ID: 4259B-DFZM7210
OSRAM SYLVANIA Inc.
200 Ballardvale Street
Wilmington, MA 01887 USA
888-531-7573
www.osram-americas.com
OSRAM is a registered trademark of OSRAM GmbH.
SIMPLUX is a trademark of OSRAM SYLVANIA Inc.
Specifications subject to change without notice..
LMS132R1 3-17
© 2017 OSRAM SYLVANIA Inc.
www.osram-americas.com
OSRAM Wireless Plug Load (WPL)
Control Module
Wiring and installation manual
Light is OSRAM