Elevator -> Flap Mixing - FUTABA FP-7UAF Instruction Manual

2-6
>
ELEVATOR -> FLAP MIXING
This is used to apply mixing from
elevator to flap. Mixing is usually
used so that the flaps are lowered
when the elevator is raised. It
makes circular maneuvers
stunt aircraft smoother.
• The elevator up side and down
side mixing rate can be set in-
dependently.
ON side
OFF side
• FUNCTION AND DATA SETTING
with
(INH: Inhibit state)
R/U: Right or up
L/D: Left or down
13 -
Pressthe [MODE SELECT]
Mixing activate/inhibit mode setting
Set the mode with the
+ : Activate
-: Inhibit
Mixing servo direction of operation setting
Set the flashing display to "+"
(or "—") with the
Held as long as the elevator
direction.
Set the direction of operation
with the
+ : Normal direction
— : Reverse direction
Set for another direction of the
elevator
steps
Mixing rate setting
Set the flashing display to "%"
with the
Held as long as the elevator
direction.
Set the mixing rate with the
(When the + and — keys are
pressed simultaneously, 50% is
set.)
Set a different elevator
direction by repeating steps
and
To 6 - > 2
To normal display mode
keys.
keys.
is in the R/U or L/D
keys.
by repeating
and
keys.
is in the R/U or L/D
keys.