• FEATURES The FP-7FGH was specially developed for model helicopters. Please read this manual carefully before using your new set. •RF module systems allows one-touch chang- •Selective squelch circuit is unaffected by other ing of the frequency band. transmitters on other bands during simultane- •Aileron to rudder mixing is ideal for giant scale...
• CONTENTS AND RATINGS Ratings and specifications are subject to change without prior notice Model FP-7FGH Transmitter FP-T7FGH x 1 FP-R107M x 1 Receiver FP-S130x4 Servo Switch SWH-5 (R4-SWJ) NR-4Jx 1 Ni-cd battery Charger, extension cord, frequency flag, spare horn, neck strap, mount-...
• OPERATION 12 Aileron dual rate switch Aileron dual rate ON-OFF switch. When set to the upper po- This section explains the operation of the trans- sition, dual rate is turned on, and when set to mitter controls when the servo reversing switch- the lower position, dual rate is turned off.
Page 8
13 Elevator dual rate switch • Elevator dual l7 and the servo operating linearity can be switched with the DR <-> VTR switch 18 . rate ON-OFF switch. Simitar to aileron dual rate, (dual rate ON) the elevator deflection can Other functions are the same as those of the be adjusted with the elevator dual rate trimmer aileron dual rate switch.
Page 9
Neutral Right Left Adjustable with Adjustable with the rudder ATV right rudder ATV left knob (right full knob (left full Aileron) Aileron) Throttle servo Fig. 12 Aileron servo Fig. 11 14 Throttle -> Rudder mixing ON-OFF Switch This switch turns mixing from the 3 Aileron dual-rate trimmer adjusts the throttle control (channel 3) to the rudder aileron travel when the 12 aileron dual-rate or...
Transmitter RF module 22 Servo reversing switches These switches reverse the direction of the servos. It is very convenient when connecting the linkage. Change this module to switch to any fre- quency among 27, 29. 35, 40. 53 & 72 43 CH7 lever channel MHz bands.
TRAINER Connect the transmitters with the trainer cord (M-TC, purchased separately) as shown in Fig. When the switch is in the ON (pull) position, the student's transmitter operates and when the switch is in the OFF position, the instructor's transmitter operates. The transmitter at which the trainer switch is operated on-off becomes the instructor's.
• RECEIVER, SERVO, SWITCHES, AND Ni-Cad BATTERY CONNECTIONS AND USAGE PRECAUTIONS The parts inside the dotted lines are sold separately. CH7 servo Pitch control servo (Landing gear servo) Landing gear Received crystal adapter (Landing gear servo) When a rate gyro is used, this servo Rudder connects to the...
Page 13
•The servos, Ni-Cad battery,switches,extension •After setting the pushrods at the servo horns, cords, and crystals of FP-7FGH are the same check that the direction of operation of the as those of the high-quality J Series. The crystals transmitter sticks and the direction of opera- are extremely precise and are identified by tion of the rudders are the same.
S130 Nameplate S60101 GUARANTEE Your NEW FUTABA Digital Proportional R/C system is guaranteed against defects in workmanship and material for 180 days from the date of purchase when the attached registration card is returned to us within ten days of purchase.
7. Include a packing list of all items being returned, and double check to make sure that all items are packed. 8. Upon receipt of your equipment at the Futaba factory, an estimate of the cost of repair (over $25.00 only) will be sent to you.
Need help?
Do you have a question about the FP-7FGH and is the answer not in the manual?
Questions and answers