Advertisement
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Precautions:
Name | Xiaomi Electric Kettle 2 |
Model | MJDSH04YM |
Rated Voltage | 110 V~ |
Rated Frequency | 60 Hz |
Rated Power | 1000 W |
Capacity | 1.7 L |
Net Weight | 1.17 kg |
Item Dimensions | 227 × 158 × 262 mm |
Issues | Possible Causes | Solutions |
The heating indicator does not light up | Power outlet is damaged or doesn't make proper contact. | Replace power outlet. |
Power plug is not properly plugged in. | Properly plug in the power plug. | |
Power plug is deformed. | Contact the after-sales service. | |
The base is not genuine or is not for this kettle. | Use the base that came with the kettle. | |
Boiled water overflows | The maximum water level mark is exceeded. | Keep water within the required range. |
The color changes or the limescale builds up inside the kettle. | The hardness of local water is higher. | Clean in time. |
Kettle does not heat | The on/off button is not pressed or gets stuck. | Press the on/off button again. |
Cables of internal terminal blocks are loosened or damaged. | Contact the after-sales service. | |
The thermostat is malfunctioning. | Contact the after-sales service. | |
Water does not boil or not stop boiling | The thermostat is malfunctioning. | Contact the after-sales service. |
The kettle's lid is not properly closed. | Close the lid securely. | |
There is too little water with water level below the minimum mark. | Keep water amount within the required range. |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Electric Kettle 2 and is the answer not in the manual?
Questions and answers