Page 1
3. Visit and ask questions at forum. Description Features The TAS2320EVM has been designed to demonstrate the performance of TAS2320 in a mono configuration. • Mono speaker evaluation This tool utilizes the AC-MB to provide a USB to • Plug-n-play hardware mode Audio interface to the EVM.
4V to 5.5V. 1.3 Specification The TAS2320 is a digital input Class-D audio amplifier optimized for delivering best battery life for real use case of Music playback and Voice calls. TAS2320 is powered by a low voltage supply for VBAT pin and a higher voltage supply for PVDD pin.
Evaluation Module Overview 1.4 Device Information TAS2320 is a mono, digital-input, Class-D audio amplifier optimized for efficiently driving high peak power into small loudspeaker applications. The Class-D amplifier is capable of delivering 8W of max average power into 8Ω load at a battery voltage of 4.2V. Up to four devices can share a common bus via I S/TDM + I C interfaces.
Page 8
Open Additional SDA pull-up. Open Additional SCL pull-up. VBAT (U1) (J5) VIN (J21) VBAT pin on TAS2320 powered from J21, refer to Section 3.7. VBAT_SNS (J4) VBAT_SNS pin connected to GND. Short IOVDD powered from IOVDD_MB when shorted, refer to Section 3.5.
Page 9
VIN (J21) is selected by default, which is the barrel jack supplied by 5V. • VBAT (J30) is an alternative banana jack that can be used to supply VBAT to TAS2320 - U1 only. Use this for current and efficiency measurements.
Page 27
STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
Page 28
www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
Page 29
www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
Page 30
www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
Need help?
Do you have a question about the TAS2320 and is the answer not in the manual?
Questions and answers