FUTABA 6XA Instruction Manual page 12

Receiver output
channel
1
2
3
4
5
6
Multiple entries indicate that the servo function varies with the selected programming (
† ‡
=ELVN mode, =VTAL mode). Outputs with no mixing functions are shown first.
The diagram below shows the default servo connections for a model using the ACRO
mode (only three or four servos are included in the T6XAs system). Two possible model
formats are shown on the ACRO contents page. Suggested helicopter connections are given
within the helicopter setup example.
RECEIVER AND SERVO CONNECTIONS
Aircraft
(ACRO)
Right aileron or
combined right flap + aileron
†
right elevon
Elevator or
‡
V-tail right side or
†
left elevon
Throttle
Rudder or
‡
V-tail left side
Landing Gear
Flap or
combined Left flap + aileron
*
or
(tailless)
(tailless)
*
– 7 –
Helicopter
(HELI)
Aileron
Elevator
Throttle
Rudder
Gyro sensitivity
Pitch
*
=FLPR mode,